Spindles 1980-1984 Dodge Dana 44

QU40228 Spindle Bearing and Seal Kit for Dana 30, Dana 44, Dana 44IFS, and GM 10 Bolt Open Knuckle Front Axles includes genuine original equipment spindle bearing, spindle seals, and axle shaft thrust washer to service ONE Spindle. QU40228 fits...

QU40058 2-1/4" 4x4 Outer Axle Shaft Slinger for Dana 30, Dana 44, and GM 10 Bolt Front Axles acts as both a dirt deflector and a sealing surface on open knuckle axles. Replace anytime they are dinged, bent, or badly corroded. QU40058 is a genuine...

QU50750 Dana Front Spindle to Knuckle Bolt is a genuine original equipment Dana Knuckle Bolt that fits many 1970's to 1990's Chevy, Dodge, GMC, IHC, and Jeep front axles with disc brakes. A flat on the bolt head provides clearance for the spindle to fit...

QU40071 Large Axle Shaft to Spindle V-Seal is a genuine original equipment 2.25" ID Rubber V-Seal that seals between your axle shaft and spindle. Fits most Mid 1970's to 1993 SUV, 1/2, and standard 3/4 ton Model 30, 44, 44IFS, and GM 10 bolt open...

QU40070 Axle Shaft to Spindle Thrust Washer is a genuine original equipment plastic thrust washer that controls axial thrust between your outer axle shaft and spindle. Fits most Mid 1970's to 1993 SUV, 1/2, and standard 3/4 ton Model 30, 44, 44IFS, and...

QT1012i Value 4 Lug 4x4 Front Spindle Nut Socket is a durable, 1/2" drive special socket that fits 4 slot spindle nuts used on many axles from the late 1950's to 1996 including Dana 28IFS, Dana 30, Dana 35IFS, Dana 44, Dana 44IFS, Dana 60, and GM 10...

QK4734 Front Axle Shaft Spindle Bearing Set fits late 1960's to 1990's Dana 30, Dana 44, and GM 10 Bolt front axles, plus 1976-1977 Ford F-250 crew Cab Dana 60 axles. One bearing is pressed into each spindle to support the outer axle shaft. USA Made...

QK4770 Front 4x4 Spindle Nut and Washer Set includes genuine original equipment parts for Dana 44 (Dodge, Ford), GM 10 Bolt (Chevy/GMC) front drive axles. This Set was used on many SUV's, 1/2 ton and 3/4 ton Chevy, Ford, and GMC trucks with serviceable...

QK4739 4x4 Front Spindle Seal and Thrust Washer Kit contains genuine original equipment spindle seals and thrust washers to service both sides of your front axle on your 4x4 truck. Fits most Mid 1970's to 1993 SUV, 1/2, and standard 3/4 ton Model 30, 44,...

QU40056 Small Spindle to Axle Shaft V-Seal is a genuine original equipment 1-5/16" ID Rubber V-Seal that is installed in your spindle between QK4734 Spindle Bearing and QU40070 Spindle Thrust Washer. Fits most Mid 1970's to 1993 SUV, 1/2, and standard...

QU40313U Good Used Bare Front Spindle for 1980-1993 4x4 Dodge Dana 44 in SUVs, 1/2 ton, and 3/4 ton with Dana 44 front axles. This Spindle is a good used genuine original equipment replacement part we took off axles for R&D. Fits 1980-1993 Dodge...

QU40429 Tabbed Spindle Lock Washer is a genuine original equipment part for Dana 44 (Dodge, Ford), GM 10 Bolt (Chevy/GMC) front drive axles. This washer was used between the inner and outer spindle nuts on many SUV's, 1/2 ton and 3/4 ton Chevy, Ford,...