1972-1993 Dodge Van and Motorhome Dana 60 Rear Wheel Bearing Applications

Rear Wheel Hub and Bearing Application Charts
for 1972-1979 Dodge and 1978-1979 Plymouth Van and Van Based Chassis Models 
Dana 60 or Dana 60HD Full Floating Rear Axles

This Page has detailed wheel bearing and hub application charts for 1972-1979 Dodge and 1978-1979 Plymouth 3/4 ton and 1 ton vans and van chassis vehicles equipped with either Dana Spicer Model 60 5,500 pound rated single rear wheel or Dana Spicer Model 60HD 5,800 or 6,200 pound rated single or dual rear wheel full-floating rear drive axles. The vehicle models covered include:
1972 P200, B300, CB300, M300, MBL300, MBH300, P300, R300 Dana 60 or Dana 60HD Rear Wheel Bearings
1973 B300, CB300, M300, MBL300, MBH300, P200, P300, R300 Dana 60 or Dana 60HD Rear Wheel Bearings
1974 B300, CB300, MB300, P200, P300, R300 Dana 60 or Dana 60HD Rear Wheel Bearings
1975 B300, CB300, M300, MB300, P300 Dana 60 or Dana 60HD Rear Wheel Bearings
1976 B300, CB300, M300, MB300, P300 Dana 60 or Dana 60HD Rear Wheel Bearings
1977 B300, CB300, M300, MB300, P300, PB300 Dana 60 or Dana 60HD Rear Wheel Bearings
1978 B300, CB300, M300, MB300, P300, PB300 Dana 60 or Dana 60HD Rear Wheel Bearings
1979 B300, CB300, M300, MB300, P300, PB300 Dana 60 or Dana 60HD Rear Wheel Bearings

During the 1972-1979 Model Years, Dodge made a number of minor and major engineering changes to Dana-Spicer 60 series full-floating axles used in 3/4 ton and 1 ton models. Single rear wheel axles will be found on 3/4 ton and light 1 ton vehicles. The dual rear wheel Dana 60HD rear axles were used exclusively on 1 ton vans and van based chassis models. Every effort has been made to accurately cover all listed applications, but there may be year or part variations on specific vehicles that vary from those listed below. This is particularly true on van based chassis models (panel, motorhome, and delivery) that may have a chassis build date that is considerably older than the final assembly date of the complete vehicle.  If possible, always verify the parts needed before ordering.

Charts 1 and 2 1972-1979 D or W Truck Dana 60 Rear Wheel Bearing Applications: Click Here 
Chart 3 1972-1979 B, C, M, P, R Part Applications for Vans and Van based Chassis Models
Chart 4 1972-1979 B, C, M, P, R Tool Applications for Vans and Van based Chassis Models

Link to Our Complete 1972-1993 Dodge Dana 60 Rear Axle Part Page

Chart 3 PARTS for 1972-1979 Dodge  B300 Van CB300, MB300 Cutaway and Motorhome with Van Front Section M300, R300 Motorhome built on Stripped Van Chassis P200, P300 Forward Control Chassis (Delivery or Panel Van) Dana 60 Rear Wheel Bearing Components
Year	1972-1976	1974-1979.5 Up to  1-8-1979	1972-1979.5 Up to 1-8-1979	1977-1979.5 Up to 1-8-1979	1979 After 1-8-1979	1979 After 1-8-1979	1979 After 1-8-1979
Axle Model	Dana 60	Dana 60HD	Dana 60HD	Dana 60	Dana 60	Dana 60HD	Dana 60HD
Vehicle Model	B300, P200, CB300 Under 9,000 lb. GVW with Single Rear Wheels	B300 9,000 lb. GVW with Single Rear Wheels	B300, CB300, MB300, M300, R300, P300 with Dual Rear Wheels	B300, P200, CB300  Under 9,000 lb. GVW with Single Rear Wheels	B300, P200, CB300  Under 9,000 lb. GVW with Single Rear Wheels	B300 9,000 lb. GVW with Single Rear Wheels	B300, CB300, MB300, M300, R300, P300 with Dual Rear Wheels
Axle Capacity	5500 lb.	5800 lb. 6200 lb.	6200 lb.	5500 lb.	5500 lb.	6200 lb.	5500 lb.
Brake Size	12" x 2.5" 12x3*	12"x3"	12" x 3"	12" x 2.5" 12x3*	12" x 2.5"	12" x 3"	12"x2.5"
Spindle Thread	1-13/16"	2"	2"	2"	2"	2"	2"
Spindle Nut Wrench Size	2-3/8" Hex	2-9/16" Hex	2-9/16" Hex	2-9/16" Hex	2-9/16" Rounded Hex	2-9/16" Rounded Hex	2-9/16" Rounded Hex
Wheel Hub	Call	QU11288U	Call	Call	Call	QU11288U	Call
Wheel Seal	QU50892 Fits 2-5/8" OD Spindle Shaft Size	QU40450 Fits 2-7/8" OD Spindle  Shaft Size	QU40451 Fits 3" OD Spindle  Shaft Size	QU90001 Fits 2-1/2" OD Spindle Shaft Size	QU90001 Fits 2-1/2" OD Spindle Shaft Size	QU40450 Fits 2-7/8" OD Spindle  Shaft Size	QU40451 Fits 3" OD Spindle  Shaft Size
Inner Bearing	QU50891	QU50414 Bearing ID 2-1/4"	QU50376 Bearing ID 2-1/4"	QU50412 Bearing ID 2"	QU50412 Bearing ID 2"	QU50414 Bearing ID 2-1/4"	QU50376 Bearing ID 2-1/4"
Inner Cup	QU50568	QU50413 Cup OD 3-27/32"	QU50377 Cup OD 4-1/8"	QU50411 Cup OD 3-1/4"	QU50411 Cup OD 3-1/4"	QU50413 Cup OD 3-27/32"	QU50377 Cup OD 4-1/8"
Outer Cup	QU50658	QU50411 Cup OD 3-1/4"	QU50411 Cup OD 3-1/4"	QU50411 Cup OD 3-1/4"	QU50411 Cup OD 3-1/4"	QU50411 Cup OD 3-1/4"	QU50411 Cup OD 3-1/4"
Outer Bearing	QU50659	QU50412 Bearing ID 2"	QU50412 Bearing ID 2"	QU50412 Bearing ID 2"	QU50412 Bearing ID	QU50412 Bearing ID	QU50412 Bearing ID 2"
Spindle Nut, Inner (2 per side) up to January 8, 1979	QU40026	QU11070	QU11070	QU11070	Not Used	Not Used	Not Used
Spindle Lock Washer up to January 8, 1979	QU40027 See Safety Note Below	QU40051 See Safety Note Below	QU40051 See Safety Note Below	QU40051 See Safety Note Below	Not Used	Not Used	Not Used
Spindle Nut, Locking (1 per side) after January 8, 1979	Not Used	Not Used	Not Used	Not Used	QU40077 See Safety Note Below	QU40077 See Safety Note Below	QU40077 See Safety Note Below
Lock, Spindle Nut (1 per side) after January 8, 1979	Not Used	Not Used	Not Used	Not Used	QU40089 See Safety Note Below	QU40089 See Safety Note Below	QU40089 See Safety Note Below
Spindle Nut Set	QK4763	QK4730 Replacement Set, Hex Size is 2.5"	QK4730 Replacement Set, Hex Size is 2.5"	QK4730 Replacement Set, Hex Size is 2.5"	QK4015	QK4015	QK4015
Axle Flange Gasket	QU40078	QU40078	QU40078	QU40078	QU40078	QU40078	QU40078
Tapered Axle Shaft Lock Cone For Stud	QU40577 Used up to April 1, 1976	QU40577	QU40577	Not Used	Not Used	QU40577	QU40577
Bolt, Axle Shaft to Hub	QU40535 Used After April 1, 1976	Not Used	Not Used	QU40535	QU40535	Not Used	Not Used
Wheel Bearing Only Kit	Order Individual Bearings	TK4891	TK4892	TK4915	TK4915	TK4891	TK4892
Wheel Bearing and Seal Kit Parts Only, No Tools		TK8321	TK8322	TK8320	TK8320	TK8321	TK8322
Master Wheel Bearing and Seal Kit with Tools		TK8304	TK8305	TK8303	TK8303	TK8304	TK8305
*For under 9,000 GVW, 12x3" Brakes exclusive to 1976-1977 CB300 with 8800 lb. GVW Safety Note: The following parts are considered Single Use Items that should NEVER be reused due to a loss of retention and/or strength that may lead to your spindle nuts backing off if reused: QU40027 and QU40051 Bend-Over Tab Spindle Nut Lockwashers QU40077 Spindle Nut QU40089 Spindle Nut Lock Wedge
Chart 4 TOOLS for 1972-1979 Dodge  B300 Van CB300, MB300 Cutaway and Motorhome with Van Front Section M300, R300 Motorhome built on Stripped Van Chassis P200, P300 Forward Control Chassis (Delivery or Panel Van) Dana 60 Rear Wheel Bearings and Seals
Year	1972-1976	1974-1979.5 Up to  1-8-1979	1972-1979.5 Up to 1-8-1979	1977-1979.5 Up to 1-8-1979	1979 After 1-8-1979	1979 After 1-8-1979	1979 After 1-8-1979
Vehicle Model	B300, P200, CB300 Under 9,000 lb. GVW with Single Rear Wheels	B300 9,000 lb. GVW with Single Rear Wheels	B300, CB300, MB300, M300, R300, P300 with Dual Rear Wheels	B300, P200, CB300  Under 9,000 lb. GVW with Single Rear Wheel	B300, P200, CB300  Under 9,000 lb. GVW with Single Rear Wheels	B300 9,000 lb. GVW with Single Rear Wheels	B300, CB300, MB300, M300, R300, P300 with Dual Rear Wheels
Spindle Nut Wrench	QT1226i 2-3/8" Hex Spindle Nut Socket	QT1218 for Stock 2-9/16" Nut QT1013 for Replacement 2-1/2" Nut	QT1218 for Stock 2-9/16" Nut QT1013 for Replacement 2-1/2" Nut	QT1218 for Stock 2-9/16" Nut QT1013 for Replacement 2-1/2" Nut	QT1009i 2-9/16" Rounded Hex Spindle Nut Socket	QT1009i 2-9/16" Rounded Hex Spindle Nut Socket	QT1009i 2-9/16" Rounded Hex Spindle Nut Socket
Installer, Wheel Seal	QT1511	QT1500	QT1512	QT1502	QT1502	QT1500	QT1512
Installer, Inner Wheel Bearing Cup	QT1805	QT1804	QT1806	QT1801	QT1801	QT1804	QT1806
Installer, Outer Wheel Bearing Cup	QT1814	QT1801	QT1801	QT1801	QT1801	QT1801	QT1801