QU40228 Spindle Bearing and Seal Kit for Dana 30, 44, 44IFS, GM 10 Bolt

QU40228 Spindle Bearing and Seal Kit for Dana 30, Dana 44, Dana 44IFS, and GM 10 Bolt Open Knuckle Front Axles includes genuine original equipment spindle bearing, spindle seals, and axle shaft thrust washer to service ONE Spindle. QU40228 fits most Mid 1970's to 1993 SUV, 1/2, and standard 3/4 ton Model 30, 44, 44IFS, and GM 10 bolt open knuckle front axles. Bearing and thrust washer Made in U.S.A., seals imported.

Also see QK4739 Thrust Washer and Seal Kit.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Matching Slinger
Kit Includes
Spindle Bearing
Thrust Washer
Matching Parts
Applications

Tech Note 1: Matching Slinger
The matching Axle Shaft Slinger is QU40058.

Tech Note 2: Kit Includes
QU40228 includes one each of these genuine original equipment component parts:
QK4734.5 Spindle Bearing
QU40056 Small V-Seal
QU40070 Axle Shaft Thrust Washer
QU40071 Large V-Seal

Tech Note 3: Spindle Bearing
For all applications that use this Kit, QK4734.5 Spindle Bearing will be installed so QU40056 Small V-Seal will be even with or slightly below the face of the spindle when installed after the bearing.

Tech Note 4: Thrust Washer
Install QU40070 Thrust Washer with the chamfered side against the axle shaft face (flat side towards the Spindle). Install QU40071 V-Seal on QU40058 Axle Shaft Slinger with the flexible lip towards the Spindle. Install QU40056 V-Seal with the flat face towards the Spindle Bearing. Lubricate the parts with QU90018 Pyroplex Plus® synthetic NLGI #2 grease or other suitable water resistant grease.

Tech Note 5: Matching Parts
Matching Parts for QU40228 Spindle Bearing and Seal Kit:
QK4739 Thrust Washer and Seal Kit
QU40058 Axle Shaft Slinger
QU90018 Pyroplex Plus® Synthetic NLGI #2 Grease
Chevy & GMC Shop Manuals
Dodge & Ram Shop Manuals
Ford Shop Manuals
Jeep Shop Manuals

Applications:

Chevy and GMC:
Suburban Full Size Blazer and Jimmy: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
K10/K15/K1500/V1500 1/2 Ton 4x4 Truck: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987
K20/K25/K2500/V2500 3/ 4 Ton 4x4 Truck: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987

Dodge and Plymouth:
Ramcharger, Trailduster, W150: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991. 1992, 1993
W250 with Dana 44 Front Axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991. 1992, 1993

Ford:
Bronco, F100, F150: 1976, 1977, 1978, 1979
F250 with Dana 44 Front Axle: 1976, 1977, 1978, 1979
F-150 and Full Size Bronco: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992
F-250 with Dana 44IFS Front Axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992

International:
Scout: 1976, 1977, 1978, 1979, 1980

Jeep:
CJ: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986
Cherokee: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983
Wagoneer, Grand Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
J10, J20 Truck: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988