QK8311 Rear Wheel Bearing Kit with Tools for GM 14 Bolt 10.5" Axles

QK8311 Torque King® Rear Wheel Bearing Kit with Tools for 1973 to 2000 GM 14 Bolt 10.5" (10-1/2") and GM Dana 70 Full Float Rear Axles Replace those pitted, worn out rear wheel bearings on your 1973-2000 3/4 or 1 Ton with the 14 bolt full-float rear axle. QK8311 Kit that includes 4 Timken® Bearings with Cups, 2 Wheel Seals, 2 Axle Shaft Flange Gaskets, 2 Spindle Lockwashers, Threadlocker, PLUS Tools.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Kit Includes
Axle Shaft Flange Gaskets and Spindle Hardware
To Install
Matching Parts
1994
Applications

Tech Note 1: Kit Includes
QK8311 Includes:
2 QU50412 Timken® Bearings
2 QU50411 Timken® Bearing Cups
2 QU50399 Timken® Bearings
2 QU50396 Timken® Bearing Cups
2 QU50221 Rear Wheel Seals
2 QU30010 Flange Gaskets
2 QU40037 Spindle Lock Washers
QT1025 Rear Spindle Nut Socket
QT1804 Inner Bearing Cup Installer
QT1801 Outer Bearing Cup Installer
QT1100 Driver Handle
QT1509 Rear Wheel Seal Installer
S9978 Medium Strength Blue Threadlocker

Tech Note 2: Axle Shaft Flange Gaskets and Spindle Hardware
GM 14 Bolt Axles will use different Axle Shaft Flange Gaskets & Spindle Hardware depending upon the year.
Axle Shaft Flange Gaskets: 1973-1991 Order (2) QU30010, 1992-2000 Order (2) QU30108
Spindle Nut Lockwasher: QU40038 (fits Double Spindle Nuts used through 1979 plus some 1980, 1981)
Spindle Nut Retainer Ring: QU30109 (Fits Single Spindle Nut, first used mid 1980, fits 1980-2000).

Tech Note 3: To Install
The GM 14 Bolt/Dana 70/Dana 70HD Full Floating Rear Axle Hub is designed so the outer wheel bearing and cup are installed from the BACKSIDE of the hub before the inner wheel bearing components are assembled. Therefore, installation of the outer wheel bearing requires three tools (besides a driver handle) instead of one. The flat side of QT1801 Cup Installer is used to drive/press the outer cup in until it clears the snap ring groove. The Snap Ring is then installed in the hub groove with a long reach pliers or snap ring pliers (tool depends upon snap ring type). Next you use a suitable tool to drive/press the cup back against the snap ring. Inner Wheel Bearing and Seal installation is done in the conventional manner.
Tool Recommendations:
QT5500 Bearing Packer

Tech Note 4: Matching Parts
QU40036 Spindle Nut 1973-1981 (Uses 2 per side)
QU40037 Spindle Nut Lockwasher 1973-1981
QU40038 Inner Spindle Thrust Washer 1973-1981 (used with QU40036 Nuts and QU40037 Lock Washer)
QU30111 Spindle Nut, Single Type (Used on some 1980-1981 and 1982-2000)
QU30110 Spindle Nut Key (used with QU30111)
QU30109 Spindle Nut Retainer Ring (1 or 2 per side depending upon year, used with QU30111)
QU30112 Hub Snap Ring for Outer Wheel Bearing Cup (most recent design)
TK8310 1973-2000 GM 10 Bolt Rear Wheel Bearing Kit WITHOUT Tools
TK4906 1973-2000 GM 10 Bolt Rear Wheel Bearing ONLY Kit
Chevy and GMC Factory Shop Manuals on CD

Tech Note 5: 1994
In 1994, General Motors sold it's axle division to a group of investors who renamed their new acquisition American Axle Manufacturing (AAM). The AAM 14 Bolt, 10-1/2" Ring Gear full floater rear axle is what used to be called the Chevy or GM corporate 14 Bolt, 10-1/2" Ring Gear full float rear axle.

Applications
GM with 14 Bolt 10-1/2” and Dana 70 Full Float Rear Axles: 1973, 1974, 1975, 1975, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000