QT1509 Rear Wheel Seal Installer for 1973-2000 GM 14 Bolt Rear Axles

QT1509 Rear Wheel Seal Installer for 1973-2000 GM 14 Bolt Full Float Axles is specifically made to install QU50221 inner wheel seals to the correct depth without damaging the seal or losing the spring. Applications include almost all 1973-2000 GM 3/4 ton and 1 ton trucks with 14 bolt, full-float rear axles. A relief groove in the installer allows adequate clearance for the outer seal lip, thereby preventing one of the most common causes of premature seal failure. Aluminum Installer is Made in U.S.A. by us here in Roberts, Montana.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
After Installation
Driver Handles
Applications

Tech Note 1: After Installation
After the seal is installed, lubricate the seal lip with clean wheel bearing grease.

Tech Note 2: Driver Handles
QT1509 has a 5/8" center hole for attaching Installer to QT1100, QT1101, QT1116, or QT1119 Driver Handles.

Applications
GM 14 Bolt Full Float Rear Axles: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000