Tools 1973-1980 Scout II Dana 44 Front

QT1100 1" x 8" Standard Duty Installer Driver Handle with 5/8" Tip and knurled hand grip is used with QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8" center holes. QT1100 will become one of the most used tools in...

QK4647 Front Axle Inner Oil Seal Remover Set with 1-3/4" Driver Tip for many common front inner axle oil seals is a real time saver! Use to remove the inner axle shaft oil seals on any 4x4 solid front drive axle with axle housing tube...

QT1116 8" Pro Duty Installer Driver Handle with knurled hand grip are used with QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8'" center holes. Black Oxide finish. 1.25" diameter x 8" usable length for general purpose...

QT1011 2-1/16" Hex Front Spindle Nut Socket for 1946-1986 Jeep CJ-5, CJ-6, CJ-7, and CJ-8 (Scrambler) and most other Jeep vehicles from 1942-1971 EXCEPT M715 series. This Special Thin-Wall 1/2" drive socket is an absolute necessity to properly service...

QT1044 1-5/16"-1-3/8" Inner Pinion Bearing Installer for Ford 9"rear axle, Dana 25, Dana 27, Dana 30, Dana 44, Dana 44IFS, Dana 50, and Dana 50IFS front/rear drive axles or other applications that require installing bearings with 1-5/16" to 1-3/8"...

QT1802 Bearing Cup Installer is specifically machined to fit QU10142, QU10145, QU50447, QU50629, and QU50653 bearing cups commonly used in axle, transmission and wheel applications. Precision CNC machined solid steel tool is drilled to accept any...

QT1075 1/2" Drive Ball Joint Adjuster Sleeve Socket for a host of domestic 4x4s from 1969 to 1993. QT1075 also fits 2018 and newer Mahindra Roxor 4x4s. Chevy, Dodge, Ford, GMC, International, Jeep all used the QU40187 Ball joints on just about every 4x4...

QT1041 Inner Front Axle Shaft Oil Seal Installer for Dana 44 Front Axles installs the QU40055 current design original equipment CR made seal in many older 4x4 trucks with Dana-Spicer Model 44 axles. Our QT1041 has a depth stop making it easy to install...

TS4871 Dana 44 Inner Fixed Depth Axle Seal Tool Set Quickly and easily installs QU40055 Inner Axle Seal in vintage Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with Dana 44 front axles. Our unique installer design will press in your new Inner Axle...

QT1161 Seal Installer Thrust Plate for 1955-2006 Dana 44 Front Axles is used with QT1165 Press Screw and the correct Seal Installer for your axle to install the inner axle shaft oil seals in 1955-2006 Dana 44 4x4 solid beam front axles without vacuum...

QT1165 Inner Front Axle Shaft Oil Seal Installer for GM 10 Bolt and Dana 44 Front Axles is used to install CR seals on many older trucks with Dana 44 axles and all GM trucks with the GM 10 bolt solid front axle. This tool does not have a depth stop...

TS4872 Dana 44 Adjustable Depth Inner Axle Seal Tool Set Quickly and easily installs original equipment QU40055 Inner Axle Seal in vintage Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with Dana 44 front axles. Our unique installer design will press...