QT1165 Inner Front Axle Shaft Oil Seal Installer for GM 10 Bolt, Dana 44

QT1165 Inner Front Axle Shaft Oil Seal Installer for GM 10 Bolt and Dana 44 Front Axles is used to install CR seals on many older trucks with Dana 44 axles and all GM trucks with the GM 10 bolt solid front axle. This tool does not have a depth stop making it suitable for use on both Dana 44and GM 10 bolt applications, however, for a reference point, you will need to check the depth of the old seals before removing them. GM always used a CR seal for the 10 bolt, but many Dana axles were originally equipped with a NOK seal which Spicer has replaced with the CR design. Made in U.S.A. by Us Here in Montana. (Also see QT1041 for Mod 44) Included in QK4872 Kit and TS4872 Tool Set.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Must Be Removed
Use Proper Tools
Applications

Tech Note 1: Must Be Removed
Your brakes, wheel hubs, axle shafts, and differential must be removed from the housing to replace the axle shaft seals.

Tech Note 2: Use Proper Tools
Installing GM 10 Bolt or Dana 44 Inner Axle Shaft Oil Seals without damaging the seal, your axle housing, or your fingers can be difficult UNLESS you have the correct tools for the job. Combine this seal installer with our QT1189 (D44) or QT1133 (10B) Press Screw and QT1161 (D44) or QT1186 (10B) Thrust Plate and you will quickly and easily install those pesky oil seals without mashing your fingers or cussing a blue streak! Plus the Seal will be installed right the first time, with no warranty comebacks.

Applications

Chevy/GMC:
All: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969
K5, K10: 1973, 1974, 1975, 1976, 1977
K20: 1972, 1973, 1974, 1975, 1976, 1977

Ford:
All F100, F250: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966
F-250: 1967, 1968, 1969
F100, F150, F250: 1975, 1976, 1977
Bronco: 1976, 1977

Dodge:
W100, W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969
W100, W200: 1972½, 1973, 1974, 1975, 1976, 1977
Ramcharger: 1974, 1975, 1976, 1977

IHC:
All Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970
Scout II: 1973, 1974, 1975, 1976, 1977, 1978
1100, 1200 (except 1200 Heavy Duty): 1971½, 1972, 1973, 1974, 1975

Jeep:
All Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973
Cherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977