Description
QU40027 Rear Dana 60 Bend Over Tab Spindle Nut Lockwasher for 1959 to 1988 light trucks with Dana 60 rear axles having 1-13/16" diameter spindle threads. QU40027 is used with two QU40026 Spindle Hex Nuts that measure 2-3/8" across the flats or with a now discontinued 2-3/8" rounded hex spindle nut. This lockwasher mainly fits Chevy, Dodge, Ford, GMC, and Jeep 3/4 ton 4x4 and 4x2 trucks, but it was also used by Dodge on some 1960's 4x4 W100 trucks. USA Made. Sold Individually, Order 2 per Axle.
Also see QK4763 Spindle Nut and Washer Kit.
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Replace
Nut Torque
Metal Gasket
Matching Parts
Applications
Tech Note 1: Replace
Never reuse a bend-over-tab spindle lockwasher as metal fatigue on the bend over and spindle tabs may cause them to break off which could allow the spindle nuts to back off! I have been driving behind vehicles that had this happen. It is not a pretty sight.
Tech Note 2: Nut Torque
Spindle nut torque values will vary depending upon make and model. You MUST be careful not to over tighten the outer spindle nut which could cause the inside tab on the lockwasher to sheer off!
Tech Note 3: Metal Gasket
Metal Axle Shaft to Hub Gasket applications for vehicles using this part are:
Chevy, GMC 1965-1972: QU30051
Dodge 1963-1968: QU40078 (fits models that don't use an outer wheel seal sandwiched between 2 gaskets)
Jeep 1974-1988: QU30051
Tech Note 4: Matching Parts
Matching Parts for QU40027 in 1965-1972 GM and 1974-1988 Jeep J20 Dana 60 Rear Axle Applications:
QU50780 Inner Wheel Bearing
QU50701 Outer Wheel Bearing Cup
QU50703 Outer Wheel Bearing
QU50273 Wheel Seal
QU30051 Axle Shaft Flange Gasket
QU40367 Dana 60/Dana 70 Differential Cover Gasket
QU42029 Reuseable Dana 60 Differential Cover Gasket
QU50413 Outer Wheel Bearing Cup
QU40026 Hex Spindle Nut
QU90018 Pyroplex Synthetic Grease
QT5500 Wheel Bearing Packer
Chevy & GMC Shop Manuals
Dodge & Ram Shop Manuals
Ford Shop Manuals
Jeep Shop Manuals
Chevy and GMC:
20 Series with Dana 60 Rear Axles: 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972
Dodge:
200 Series plus some W100 models: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Ford:
Dana 60 with 1-13/16" Spindle Threads: 1969 and prior
Jeep:
3/4 Ton Trucks with Full Float Rear Axles: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988
Warranty
Product Reviews
-
5
they were what ther we said to be
-
5
They worked great
-
5
Was told these were obsolete.I have given your business name and phone number to 8 differential shops that I was referred to. Thank You from my partner and myself.
-
Lock washer
Looked all over for these for my 69 Ford F-250 crew cab.No one seems to list them for my application but after reviving them they were a perfect match except for the cuts in the middle of each leaf but that didn't matter .so we back on the road! Thank you good stuff!
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.
