TS6000 5.9L & 6.7L Cummins Rear Main Crank Seal Install Tool Set

TS6000 Cummins Rear Crankshaft Seal Tool Set Quickly & easily replace that leaky rear crankshaft seal on your 1989-2018 Cummins 5.9L or 6.7L diesel engine without damaging your new seal! (See Tech Note 2 for 2019 and newer Ram 6.7L engines)!   No need to remove the flywheel housing or seal adapter! TS6000 Tool Set Includes CNC machined aluminum installer tool, guide studs, self tapping screws, drill bit, and hardware package. In addition to setting the seal square and to the correct depth, the installer can also be used to press on optional QU11101 Seal with a steel crankshaft wear sleeve! USA Made. Instructions and Torque Specs TSB6000 Cummins Rear Crank Seal Replacement Tech Bulletin are included with every TS6000 Tool Set.

Need the Tools and Seal? See QK6000 Rear Crankshaft Installation Seal & Tool Kit.
Already have the Tools? Order QU10556 Crank Seal with pilot and centering rings
Need Instructions or Torque Specs? See TSB6000 Cummins Rear Crank Seal Replacement Tech Bulletin. The TSB6000 is now included in every TS6000 Tool Set!

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Centering Ring
2019 and newer 6.7L Ram Trucks
Seal Installer
Seal Starter
Will not work on Ford
Matching Parts
Applications
Video

Tech Note 1: Centering Ring
With the QK6000 Kit there is absolutely no need to remove the flywheel housing and rear seal adapter. However, if for any reason, you do need to remove the rear seal adapter from the back of the block, we do include a Cummins supplied stamped steel centering ring to center the rear seal adapter. The centering ring is required to center the seal retainer plate because Cummins did not dowel the seal retainer to the block so it can be installed off center unless you use the line up ring. The Seal Retainer Plate is gasketed to both the back of the block and the top of the oil pan.

Tech Note 2: 2019 and newer 6.7L Ram Trucks
Effective with the 2019 model year, Ram trucks with the 6.7L Cummins engine have crankshafts with a 10 hole flywheel bolt pattern instead of the 8 bolt pattern used for 2018 and prior years. The bolt circle and bolt thread is the same same so our QT3000 Installer and QU10556 Seal will still work on 2019 and newer engines, however Cummins also increased the seal installation depth and used a narrower seal so we are recommending you use our new QT6050 Installer and TK11895 Seal for 2019 and newer engines. QT6050 Installer and TK11895 seal are included in QK6020 Kit. TS6020 Tool Set includes QT6050 Installer.

Tech Note 3: Seal Installer
Our Aluminum Crank Seal Installer will install both replacement seals and QU11101 seals with wear sleeves to the correct depth on Cummins 4BT and 6BT Diesel engines. This includes Dodge trucks and most industrial, ag, marine, and automotive engines with 4BT and 6BT diesel engines. Replaces Cummins crank seal installer tool 3824078.

Tech Note 4: Seal Starter
The thin plastic disposable Seal Starter is pre-installed in the Seal. The Seal Starter is flared slightly to fit over the end of the crank. Once the Seal is slid over the Starter and onto the crank, remove and discard the Seal Starter.

Tech Note 5: Will not work on Ford!
Our installer does not install the rear crank seal on most Ford Cummins 5.9L Diesel engines!

Tech Note 6: Matching Parts
Related Parts and Tools for QK6000 Cummins Diesel Rear Crankshaft Seal Kit:
QU11101 Rear Crankshaft Seal with wear sleeve for Dodge Cummins
QU10523 Clutch Release Fork for 1989-1993 Cummins Diesel
QU10565 Clutch Release Fork for 1994-up Cummins Diesel
QU51002 Clutch Release Bearing Assembly for 1989-up Cummins Diesel
QU10558 Stock Needle Pilot Bearing for 1994-up Cummins Diesel
QU51010 Upgrade Ball Pilot Bearing for 1989-up Cummins Diesel
QK6007 Clutch Pivot Ball Kit for 1989-1993 Cummins Diesel
QK6005 Clutch Pivot Ball Kit for 1994-up Cummins Diesel
QK6008 Clutch Cover Bolt Kit for 1989-1993 with Sachs 13" original equipment type clutch
QK6010 Clutch Cover Bolt Kit for 1994-2004 5 Speed and 1999-2000 6 Speed (12.4" Clutch)
QK6015 Clutch Cover Bolt Kit for 2001-2005 6 Speed NV5600 Transmission (13" Clutch)
QK6009 Flywheel Bolt and Washer Kit for 1989-2005.5
QT3004 1-1/4"-10 Spline Clutch Alignment Tool for Dodge Diesel 5 Speed and 1999-2000 6 speed
QT3016 1-3/8"-10 Spline Clutch Alignment Tool for 2001-up 6 Speed
QT3001 Barring Tool for Dodge Cummins Diesel
Dodge & Ram Shop Manuals

Applications:
Cummins:
4BT and 6BT Diesels

Dodge and Ram:
D250, W250, D350, W350 with the 5.9L Cummins Diesel: 1989, 1990, 1991, 1992, 1993
Ram 2500, Ram 3500 with the 5.9L Cummins Diesel: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2007.5
Ram 2500, Ram 3500 with the 6.7L Cummins Diesel: 2007.5-up
Ram 4500, Ram 5500 with the 6.7L Cummins Diesel: 2008-up

Cummins Rear Crank Seal Replacement Video