QT1092 Double Step Axle End Thrust Plate

QT1092 Double Step Axle End Thrust Plate is placed on the outer end of the axle tube to act as a thrust plate during axle shaft seal installation on 2000-2002 Dodge Ram 2500, Ram 3500 4x4 trucks with vacuum controlled Central Axle Disconnect (CAD). QT1092 is made to fit 1988-2001 Dodge Axles with 2-1/8" Axle Tube inside diameters AND 2000-2002 Ram 2500, Ram 3500 Dana 60 front axles which have 2-3/4" Axle Tube inside diameters. 5/8" ID center hole accepts QT1048 Press Rod. Made in Roberts, Montana, U.S.A.
Also See:
QT1047 Single Step Axle End Plate for 1988-1993 Dodge Ram W-150, W-205 with Dana 44 front axle, 1994-2001 Dodge Ram 1500 (Dana 44) and 1994-1999 Dodge Ram 2500, Ram 3500 (Dana 44, Dana 60).
QT1131 Single Step Axle End Plate for 2000-2002 Dodge Ram 2500, Ram 3500 (Dana 60).

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Product Note
Tech Help
Dana 60 CAD
Applications

Tech Note 1: Product Note
QT1092 is stepped so when you place pilot step in the end of the axle tube, it will center the pull rod which insures your seal will be installed square to the axle bore. Also See our QT1002, QT1029, QT1190, and QT1136 Seal Installers for Ram 1500 and 1994-1994 Ram 2500, Ram 3500 and QT1070, QT1071 Seal Installers for 2000-2002 Dodge Ram 2500, Ram 3500. QT1048 Press Screw is used for all these applications.

Tech Note 2: Tech Help
Need tech help on how to perform inner axle seal replacement on your 2000-2002 Dodge Ram 2500 or Ram 3500? Get my TSB4620 Inner Axle Seal Replacement Tech Service Bulletin, a fully illustrated, 8 page publication with 31 color photos that is specific to 1994-1999 models but is equally applicable to 2000-2002 model service procedures except for the seal tool numbers and brake rotor removal (2000-2002 brake rotors are not part of the hub assembly). Available in print version.

Tech Note 3: Dana 60 CAD
All Dodge Ram 2500 and Ram 3500 4x4 trucks were built with Dana 60 CAD front axles. For the 2002 model year, early production trucks have the CAD Dana 60, but most later production axles do not have the CAD feature. The Dodge Dana 60 was replaced by a AAM 925 axle for the 2003 model year.

Applications

Dodge:
Dodge Ram Charger and Plymouth Trailduster: 1988, 1989, 1990, 1991, 1992, 1993
Dodge W-150: 1988, 1989, 1990, 1991, 1992, 1993
Dodge W-250 with gas engine and Dana 44 Front Axle: 1988, 1989, 1990, 1991, 1992, 1993
Dodge Ram 1500: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Dodge Ram 2500 with Dana 44 Axle: 1994, 1995, 1996, 1997
Dodge Ram 2500 and Ram 3500 with Dana 60 Axle: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Ram 2500, Ram 3500 with Central Axle Disconnect Dana 60 Axle: 2002