Description
QU10099 28 Tooth 1992-1994 GM NV4500 3rd Gear Fits your 1992 to 1994 GM New Venture NV4500 5 speed manual transmission with 6.34:1 1st/reverse gear ratios. A quality reproduction gear with a welded clutch ring like the original. Your matching countershaft 3rd gear must have 32 teeth. Imported.
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Product Note
3rd Gear Failures
NV4500 Tools
Matching Parts
Applications
Tech Note 1: Product Note
QU10099 is a 28 tooth, bearing supported mainshaft 3rd gear that is ONLY compatible with 1992-1994 GM New Venture NV4500 5 speed manual transmissions with 6.34:1 1st and reverse gear ratios. Matching NV4500 countershafts have 32 3rd gear teeth. QU10099 is NOT compatible with medium ratio 1995-2007 GM or 1992-2005 Dodge NV4500 models with the 5.61:1 1st gear ratio.
Tech Note 2: 3rd Gear Failures
3rd Gear tooth failures in New Venture NV4500 5 speed manual transmissions are commonplace in transmissions mated to enhanced horsepower Diesel engines. For stock or near stock power applications, 3rd gear failures are usually a lubrication related failure that damages the bearing bore. Another failure is synchronizer clutch tooth wear and or synchro cone wear caused by incorrect lubricant or the use of cheap imported bronze synchro rings instead of OE style lined steel rings. Problems with your clutch not fully releasing or crankshaft pilot bearing/bushing dragging can also lead to clutch teeth wear from "grinding" the gears during shifting.
There are claims that cryogenically treating NV4500 gears will increase gear strength as much as 30%. Unfortunately, there does not seem to be any peer-reviewed documentary evidence to support those claims. Cryogenically treating gears is primarily a cold-hardening process that changes the molecular structure of steel to decrease wear while retaining or increasing hardness. If properly done, it is probable the cryogenic treatment process does slightly increase the impact and fatigue resistance of NV4500 gears, but not enough to significantly increase the ability of an NV4500 transmission to reliably handle more than 600 Lb.-Ft. of input torque especially considering the maximum factory torque rating of the GM NV4500 transmission is only 450 Lb.-Ft..
Tech Note 3: NV4500 Tools
Need Torque Specs or Rebuild procedures? Order my 116 page, full color illustrated TM1003 NV4500 Rebuild Manual.
You will need some special tools to correctly service your NV4500 Transmission. The chart below lists our current NV4500 Special Tools for popular models.
TOOLS for SPECIFIC NV4500 MODELS |
||||||
Component | 23 Spline Dodge 4x4 NV4500LD |
29 Spline Dodge 4x4 NV4500HD |
30 Spline Dodge 4x2 NV4500LD |
31 Spline Dodge 4x2 NV4500HD |
32 Spline GM 4x4 |
35 Spline GM 4x2 |
Mainshaft Nut | QT2002 | QT2001 QT2036 |
QT2002 | QT2001 QT2036 |
QT2002 QT2028 |
1-1/2" Hex Socket |
Mainshaft Holding | NLA | QT2000 | NLA | QT2011 | N/A | N/A |
5th Gear Nut Torx® Cross Bolt |
N/A | QT9205 | N/A | QT9205 | N/A | N/A |
Output Seal Installer | N/A | QT1801 | N/A | QT2058 CALL |
Not Used | Not Used |
Tailshaft Bushing Remover and Installer | Not Used | Not Used | Not Used | QT2044 | Not Used | Not Used |
TOOLS For ALL NV4500 MODELS |
||||||
Countershaft Front Bearing Cup Installer |
QT1802 | Use with QT1101 or QT1119 Driver Handle. Also can use flat side to install Dodge 4x4 Rear Output Seal | ||||
Countershaft Front Bearing Installer | QT2004 | Can also use to press 3-4 Synchro Hub on original equipment mainshafts | ||||
Input Bearing & Countershaft Rear Bearing Installer | QT2005 | Can also use to install Input Seal | ||||
Input Bearing Cup Installer | QT1801 | Use with QT1100, QT1101, QT1116, or QT1119 Driver Handle. | ||||
Countershaft Support | QT2006 | Use to support front of countersahft when installing countershaft rear bearing | ||||
1-2 Synchronizer Support | QT2008 | Use to support 1-2 synchronizer hub during synchronizer assembly | ||||
10mm 1/2" Drive 12 Point Socket | QT1020 | USA Made Impact Socket for Factory Tailshaft Housing Bolts | ||||
Long Shank Punch for Shift Lug | QT9300 | 3/16" x 8" Shank for 5th Gear Shift Lug Roll Pin |
Tech Note 4: Matching Parts
Other Matching Parts for QU10099 3rd Gear:
QU10135 Bearing, 3rd Gear
QU10004 Synchronizer Friction Ring
QU10301 Snap Ring, 2-3 Gear Thrust Washer Retaining
QU10302 Thrust Washer (between 2nd and 3rd Gear)
QU10313 Teflon Bearing Spacer for 3rd Gear
QU10316 Pin, Thrust Washer Anti-Rotation
QU10094 Countershaft 3rd Gear
QU10001 Premium Bearing and Seal Kit 1992-1996 Dodge
QU10005 Premium Bearing and Seal Kit 1997-2005 Dodge
QU10061 Premium Bearing and Seal Kit 1992-1995 GM 4x4
QU10062 Premium Bearing and Seal Kit 1996-2005 GM 4x4
QU10063 Premium Bearing and Seal Kit 1992-1995 GM 4x2
QU10064 Premium Bearing and Seal Kit 1996-2007 GM 4x2
QU90020 NV4500 Manual Transmission Oil
TM1003 NV4500 Shop Manual
VSG1003DVD NV4500 Overhaul Video
Applications
Chevy and GMC:
All with 6.34:1 Low Gear Ratio New Venture NV4500 5 Speed Manual Transmission: 1992, 1993, 1994
Warranty
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.