Spindles & Steering 73-80 Scout II D44 Front

QU40228 Spindle Bearing and Seal Kit for Dana 30, Dana 44, Dana 44IFS, and GM 10 Bolt Open Knuckle Front Axles includes genuine original equipment spindle bearing, spindle seals, and axle shaft thrust washer to service ONE Spindle. QU40228 fits...

QU40058 2-1/4" 4x4 Outer Axle Shaft Slinger for Dana 30, Dana 44, and GM 10 Bolt Front Axles acts as both a dirt deflector and a sealing surface on open knuckle axles. Replace anytime they are dinged, bent, or badly corroded. QU40058 is a genuine...

QU40071 Large Axle Shaft to Spindle V-Seal is a genuine original equipment 2.25" ID Rubber V-Seal that seals between your axle shaft and spindle. Fits most Mid 1970's to 1993 SUV, 1/2, and standard 3/4 ton Model 30, 44, 44IFS, and GM 10 bolt open...

QT1011 2-1/16" Hex Front Spindle Nut Socket for 1946-1986 Jeep CJ-5, CJ-6, CJ-7, and CJ-8 (Scrambler) and most other Jeep vehicles from 1942-1971 EXCEPT M715 series. This Special Thin-Wall 1/2" drive socket is an absolute necessity to properly service...

QK4669 Hex Spindle Nut Kit for Jeeps and IHC Scouts includes Inner Thrust Washer, Spindle Lock Washer, and two 2-1/16" OD Hex Spindle Nuts with 1-5/8" threads. Fits all Jeep CJ's through 1986 and most other civilian and military Jeep vehicles from...

QU40070 Axle Shaft to Spindle Thrust Washer is a genuine original equipment plastic thrust washer that controls axial thrust between your outer axle shaft and spindle. Fits most Mid 1970's to 1993 SUV, 1/2, and standard 3/4 ton Model 30, 44, 44IFS, and...

QU40056 Small Spindle to Axle Shaft V-Seal is a genuine original equipment 1-5/16" ID Rubber V-Seal that is installed in your spindle between QK4734 Spindle Bearing and QU40070 Spindle Thrust Washer. Fits most Mid 1970's to 1993 SUV, 1/2, and standard...

QK4649 Spindle Nut and Washer Kit for Jeep, IHC Scout and Mahindra Roxor with 1-5/8" Spindle threads. Fits Jeep civilian and military Dana 25, Dana 27, Dana 30 from 1941-1986 Also fits most 1954-1971 Jeep Dana 44 Front Axles plus Dana 25 rear axles...

QU15002 Spindle Lock Washer for Jeep and Scout with 1-5/8" Spindle threads. Fits Jeep civilian and military Dana 25, Dana 27, Dana 30 from 1941-1986 Also fits most 1954-1971 Jeep Dana 44 Front Axles plus Dana 25 rear axles in WWII military MA, MB, and...

QU15046 Front Spindle Kit for 1974-1980 IHC Scout II is a genuine Dana Original Equipment induction hardened spindle with spindle bearing, axle thrust washer, and two spindle seals. This part is specific to 1977-1980 but will retrofit 1974-1976 models...

QU15000 Spindle Flat Washer for Jeep and Scout with 1-5/8" Spindle threads. Fits Jeep civilian and military Dana 25, Dana 27, Dana 30 from 1941-1986 Also fits most 1954-1971 Jeep Dana 44 Front Axles plus Dana 25 rear axles in WWII military MA, MB, and...

QU15001 Front Spindle Nut for Jeep and Scout 1-5/8" Thread X 2-1/16 Hex Front Spindle Nut for 1941-1986 Jeep and 1961-1980 IHC Scout. These nuts were used on Scouts to 1980 and most Jeep models except the 1 tons up through 1973. They also fit all...