- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
QK4727 Dana 30 & Dana 44 Front Spindle Nut Kit with Round 4-Slot & 1-5/8" Thread Nuts
4727$27.98QK4727 4 Slot Dana 30, Dana 44, GM 10 Bolt Front Spindle Nut Kit includes one each genuine original equipment QU40004 Inner Spindle Nut, QU40060 Spindle Nut Lock Washer, and QU40031 Outer Spindle Nut which fit many Dana 30 (Ford Bronco) Dana 44 (All... -
QU40228 Spindle Bearing and Seal Kit for Dana 30, 44, 44IFS, GM 10 Bolt
40228$31.98QU40228 Spindle Bearing and Seal Kit for Dana 30, Dana 44, Dana 44IFS, and GM 10 Bolt Open Knuckle Front Axles includes genuine original equipment spindle bearing, spindle seals, and axle shaft thrust washer to service ONE Spindle. QU40228 fits... -
QU40058 2-1/4" 4x4 Outer Axle Shaft Slinger for Dana 30, Dana 44, GM 10 Bolt
40058$5.98QU40058 2-1/4" 4x4 Outer Axle Shaft Slinger for Dana 30, Dana 44, and GM 10 Bolt Front Axles acts as both a dirt deflector and a sealing surface on open knuckle axles. Replace anytime they are dinged, bent, or badly corroded. QU40058 is a genuine... -
QU40054 3/8" SAE x 1-1/2" Long Front Spindle to Knuckle Bolt
40054$3.98QU40054 3/8" SAE x 1-1/2" Long Front Spindle to Knuckle Bolt is a genuine original equipment Dana Knuckle Bolt that fits many 1970's to 1990's Chevy, GMC, and Jeep front axles with disc brakes. A flat on the bolt head provides clearance for the spindle... -
QU50750 Dana Front Spindle to Knuckle Bolt
50750$6.98QU50750 Dana Front Spindle to Knuckle Bolt is a genuine original equipment Dana Knuckle Bolt that fits many 1970's to 1990's Chevy, Dodge, GMC, IHC, and Jeep front axles with disc brakes. A flat on the bolt head provides clearance for the spindle to fit... -
QU40071 Large Outer Axle Shaft to Spindle V-Seal Dana 30, 44, GM 10B
40071$7.98QU40071 Large Axle Shaft to Spindle V-Seal is a genuine original equipment 2.25" ID Rubber V-Seal that seals between your axle shaft and spindle. Fits most Mid 1970's to 1993 SUV, 1/2, and standard 3/4 ton Model 30, 44, 44IFS, and GM 10 bolt open... -
QU40232 Early Type Brass Axle Shaft Spindle Thrust Washer
40232$9.98QU40232 Early Type Brass Axle Shaft Thrust Washer measure just under 1.875" outside diameter. This thrust washer was used on most 1967-1972 4x4's with open knuckle front axles plus a few models from all manufacturers as late as 1974. It is also found on... -
QU40070 Plastic Front Axle Shaft to Spindle Thrust Washer
40070$6.98QU40070 Axle Shaft to Spindle Thrust Washer is a genuine original equipment plastic thrust washer that controls axial thrust between your outer axle shaft and spindle. Fits most Mid 1970's to 1993 SUV, 1/2, and standard 3/4 ton Model 30, 44, 44IFS, and... -
QU40004 4x4 Front 4 Slot Inner Spindle Nut with Pin Thread Size 1-5/8"
40004$24.98QU40004 4x4 Front, 4 Slot Inner Spindle Nut with Pin is a genuine original equipment part for many Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy/GMC) and 1973-1977 Ford F-250 Crew Cab Dana 60 closed knuckle front drive axles. This nut was... -
QU40060 Round Spindle Lock Washer
40060$4.98QU40060 Round Spindle Lock Washer for Dana 28IFS, Dana 30, Dana 35IFS, Dana 44 (All Makes), Dana 44IFS, 1973-1977 Ford F-250 Crew Cab Dana 60 front drive axles, and GM 10 (Chevy/GM) Bolt Front Axles. This washer was used between the inner and outer... -
QK4734 Pair of Spindle Bearings for Dana 30, Dana 44, GM 10 Bolt Front Axles
4734$26.98QK4734 Front Axle Shaft Spindle Bearing Set fits late 1960's to 1990's Dana 30, Dana 44, and GM 10 Bolt front axles, plus 1976-1977 Ford F-250 crew Cab Dana 60 axles. One bearing is pressed into each spindle to support the outer axle shaft. USA Made... -
QK4739 4x4 Front Spindle Seal and Thrust Washer Kit
4739$32.98QK4739 4x4 Front Spindle Seal and Thrust Washer Kit contains genuine original equipment spindle seals and thrust washers to service both sides of your front axle on your 4x4 truck. Fits most Mid 1970's to 1993 SUV, 1/2, and standard 3/4 ton Model 30, 44,...