Bearings & Bushings 1999-2007 GM NP263 Series

QU10130 Small Bore Rear Output Bushing for 32-spline outputs for many 1980-2007 General Motors New Process Transfer Cases in full-size 4x4's and all 1994-2002 New Process NP241DLD Transfer Cases in Dodge Ram 1500 and Ram 2500 4x4 trucks. Also fits...

QU90025 Large Bore Rear Output Bushing for 31-spline outputs for all 1998-2002 New Process NP241DHD Transfer Cases and 1996-1997 NP241DHD with 31 spline rear output shafts and a slip yoke that is approximately 2-3/16"" in diameter. QU90025 also fits...

QU50114 1 Piece Transfer Case Mainshaft Front Pilot Bearing and Cup is an original equipment, unitized drawn cup bearing that replaces X10000 Bearing and QU50083 Sealing Plug in many New Process chain drive transfer cases. The one-piece design...

X10000 Optional, Mainshaft Front Pilot Bearing is used with QU50083 Cup Type Soft Plug. Both the X10000/QU50083 combo and QU50114 1 Piece bearing were used in original equipment applications and are functionally interchangeable. This Bearing fits in the...

QU50083 Sealing Plug for Input Shafts is used with X10000 Mainshaft Pilot Bearing to prevent oil from leaking through the inside of the Input Shaft on many New Process chain drive transfer cases. Country of origin not known. Need More Info? Use the...

QU30030 Sector Shift Shaft Support Needle Bearing for GM NP246, NP263, and NP273 electric shift transfer cases in Chevy and GMC 4x4 trucks. USA made.

QU10897 Input and Front Output Ball Bearing without Snap Ring Groove for Borg Warner, NPG, NVG, MPG chain drive transfer cases. Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily...