Bearings & Bushings 1998-2002 NP241DHD

QU90025 Large Bore Rear Output Bushing for 31-spline outputs for all 1998-2002 New Process NP241DHD Transfer Cases and 1996-1997 NP241DHD with 31 spline rear output shafts and a slip yoke that is approximately 2-3/16"" in diameter. QU90025 also fits...

QU50114 1 Piece Transfer Case Mainshaft Front Pilot Bearing and Cup is an original equipment, unitized drawn cup bearing that replaces X10000 Bearing and QU50083 Sealing Plug in many New Process chain drive transfer cases. The one-piece design...

QU50873 15/16" Wide, Double Row New Process/New Venture Transfer Case Input Ball Bearing is used on many New Process and New Venture built chain drive transfer cases in full size SUVs and 4x4 trucks up to 1 ton rating. This 15/16" wide, double row...

QU50874 Narrow Transfer Case Input Ball Bearing fits many New Process and New Venture built transfer cases in full size SUVs and 4x4 trucks up to 1 ton ratings. Includes snap ring is pre-installed in bearing groove. Note: QU50874 replaces QU50158 Need...

QU50875 35mm ID Transfer Case Front Output and/or Rear Output Ball Bearing without snap ring groove fits many New Process and New Venture built chain drive transfer cases in full size SUVs and 4x4 trucks up to 1 ton ratings. QU50875 will provide many...

QU50207 Rear Output Bearing for 1996 to 2002 New Process NP241DHD Transfer Cases with 31 spline output shafts is located on the mainshaft by 2 QU10817 snap rings. It is secured in the tailshaft housing by QU10815 Snap Ring which fits the groove in the...

QU10879 Heavy-Duty, Max Capacity, Front Output Rear Bearing for many New Process and New Venture chain drive transfer cases. This max capacity, needle roller bearing has over 30% more needle rollers than the original equipment type QU50502 bearing which...

X10000 Optional, Mainshaft Front Pilot Bearing is used with QU50083 Cup Type Soft Plug. Both the X10000/QU50083 combo and QU50114 1 Piece bearing were used in original equipment applications and are functionally interchangeable. This Bearing fits in the...

QU50201 NP241DHD Transfer Case Planetary Bearing for 1994-2002 Dodge Ram 2500, Ram 3500 4x4s. This bearing, which supports QU11047 or QU50150 Range Sleeve gets pressed in the Planetary Set on New Process NP241DHD Transfer Cases in 1994-2002 Dodge Ram...

QU50502 Front Output Rear Caged Needle Bearing for New Process and New Venture Chain Drive Transfer Cases is an premium original equipment bearing used to support the rear of front output shafts on many New Process and New Venture aluminum, chain drive...

QU50083 Sealing Plug for Input Shafts is used with X10000 Mainshaft Pilot Bearing to prevent oil from leaking through the inside of the Input Shaft on many New Process chain drive transfer cases. Country of origin not known. Need More Info? Use the...

QU50157 Transfer Case Ball Bearing with Snap Ring fits many New Process and New Venture built chain drive transfer cases in full size SUVs and 4x4 trucks up to 1 ton ratings. Need More Info? Use the handy Links below to access over 40 years of...