QK4511 Dana 60 Ball Joint Kit for 1994-1999 Dodge Ram 2500, 3500

QK4511 4x4 Ball Joint Kit for all 1994-1999 Dodge Ram 2500 and Dodge Ram 3500 4x4 trucks. This Kit, which features genuine Dana-Spicer original equipment, Factory Lubed Ball Joints, includes: 2 Upper Ball Joints, 2 Lower Ball Joints, Ball Joint Hardware, QU40090 CAD Gasket, Cotter Keys for the Tie Rod Ends, Threadlocker, Anti-Seize, Disc Brake Lube, and RTV sealant. Ball Joints Made in Canada, most other parts USA Made.

Dan the Gear Man® Recommended Optional Special Tools for This Kit: TS4511 Ball Joint Press Set, QT1008i Axle Shaft Nut Socket, QT1027 Hub Bolt Socket, QT1103 Driver Handle, and QT9216 Hex Bit Socket.

Also Available:
QU40220 Ball Joint Kit for ONE Side includes 1 each Dana OEM Upper and Lower Ball Joint with Ball Joint Hardware.
QK4758 Greaseable Ball Joint Kit

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Average Ball Joint Life
Replacing Ball Joint
Applications

Tech Note 1: Average Ball Joint Life
Average ball joint life for 1994-1999 trucks is close to 150,000 miles or 7-10 years. All 4 ball joints for these years carry weight and are pre-loaded to compensate for wear and dampen steering shocks.

Tech Note 2: Replacing Ball Joint
The good news is Ball Joint replacement on these trucks is pretty easy unless the front end of your Dodge has never been apart before. Getting rusted-in wheel hubs broke free from the knuckle on your 1994-1999 Ram can be a REAL WITCH! However, not near as bad as a 2000 or newer!

Applications:
Dodge Ram:
Ram 2500 with Dana 60 Front Axle: 1994, 1995, 1996, 1997
Ram 2500: 1998, 1999
Ram 3500: 1994, 1994, 1995, 1996, 1997, 1998, 1999