QU40922U Used 19 Spline Outer Axle Shaft for 1976-1977.5 F250 Dana 44

QU40922U Used 19 Spline Outer Dana 44 Front Axle Shaft for all 1976-1977.5 Ford F250 4x4s with disc brake equipped Dana 44 Open Knuckle Front Axles. Available while supplies last.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
U-Joint Specs
1977 Change
Fits
Axle Shaft Failures
Matching Parts
Applications

Tech Note 1: U-Joint Specs
QU40922U Axle Shaft takes universal joints made to Spicer 1350WJ dimensional specifications. The cup diameter for these u-joints is 1-3/16". The 4 cups are grooved to accept Inside C-Clip Snap Rings. The installed Clips fit against the machined inner faces of the axle shaft yokes. The distance between the inside of the axle shaft yoke ears is 2-3/16". For matching u-joints, see TK40712 and QU90007.

Tech Note 2: 1977 Change
The Ford F250 underwent a major, mid-year model change in 1977 effective with serial number Y20001. Regular Cab F250 4x4s built before serial number Y20001 are "high boy" models with remote mount transfer cases and Dana 44 front axles with bolt-on type hub locks or drive flanges. 1977 regular cab 4x4s built after serial number Y20000 are "low boy" models with direct mount transfer cases and Dana 44 front axles with internal spline mount hub locks or drive gears. QU40922U fits Y20000 and lower serial number 1977 trucks.

Tech Note 3: Fits
QU40922U only fits 1976-1977.5 regular cab F-250 trucks. Crew cab F250 models have a Dana 60 front axle.

Tech Note 4: Axle Shaft Failures
Outer axle shaft operating failures are usually a result of either a broken axle u-joint or a dry spindle bearing. Good preventative maintenance can usually prevent those type of failures. A good number of axle shafts are also wrecked by poor service procedures during u-joint replacement. Over the years I have seen a lot of axle shafts with bent or broken yokes caused by the slam-bang u-joint removal and installation methods. A QT1065M C-Frame Press with the correct adapters is both the safest and best way to remove or install axle u-joints.

Tech Note 5: Matching Parts
Matching Parts for QU40922U Used Outer Axle Shaft are:
QU40058 Axle Shaft Slinger
QU40228 Spindle Bearing and Seal Kit
QU40056 Small Spindle V-Seal
QU40070 Spindle Thrust Washer
QU40071 Large Spindle V-Seal
X10000 Spindle Bearing
QU40032 Axle Shaft Snap Ring
QU40639 Left Inner Axle Shaft
QU40640 Right Inner Axle Shaft
QU40332 Front Spindle
QU95036 Lock Nut, Spindle to Steering Knuckle (use 5 per spindle)
TK40712 and QU90007 Axle U-Joints
QU40596 Solid Splined Drive Flange
QU40597 Hub Cap for Drive Flange
QU50818 Warn Manual Lockout Hub Set

Applications:
Ford:
Regular Cab F-250: 1976
Regular Cab F250 before serial number Y20001: 1977