QU40624U USED Dana 44IFS Left Inner Axle Shaft

QU40624U USED Genuine Dana Left Inner Axle Shaft that fits the driver side of ALL Dana 44 Independent Front Suspension (IFS) front axles in 1980-1996 Ford Bronco and Ford F150 4x4 vehicles. Available only while supplies last.

Also See: QU40624 New Left Inner Axle Shaft

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
U-Joints
Dimensions
Wear
Matching Parts
Applications

Tech Note 1: U-Joints
QU40624 Axle Shaft takes universal joints made to Spicer 1350WJ dimensional specifications. The cup diameter for these u-joints is 1-3/16". The 4 cups are grooved to accept Inside C-Clip Snap Rings. The installed Clips fit against the machined inner faces of the axle shaft yokes. The distance between the inside of the axle shaft yoke ears is 2-3/16". For matching u-joints, see TK40712 and QU90007.

Tech Note 2: Dimensions
QU40624 is approximately 15-11/16" long from center of u-joint hole to end. The splined end is 1-5/16" in diameter x 30 splines.

Tech Note 3: Wear
Inner axle shaft operating failures are usually a result of either a broken axle u-joint or the axle shaft seal wearing a deep groove through the shaft case hardening. Good preventative maintenance can usually prevent those type of failures. A good number of axle shafts are also wrecked by poor service procedures during u-joint replacement. Over the years I have seen a lot of axle shafts with bent or broken yokes caused by the slam-bang u-joint removal and installation methods. A C-Frame Press with the correct adapters is both the safest and best way to remove or install axle u-joints.

Tech Note 4: Matching Parts
Matching parts and tools for QU40624 Axle Shaft are:
QU40087 Left Axle Shaft Seal
QU40058 Axle Shaft Slinger 1980-1992
QU40228 Spindle Bearing and Seal Kit 1980-1992 for Outer Axle Shaft
QU40436 Spindle Bearing and Seal Kit 1993-1996 for Outer Axle Shaft
QU50444 Outer Axle Shaft for 1980-1996 Bronco and F150 with Internally Splined Wheel Hubs
QU40263 Right Inner Axle for Bronco and F150
TK40712 and QU90007 Axle U-Joints
QU40178 Differential Inner Parts Kit for 1980-1983 Bronco and F150
QU90018 Pyroplex® Protection ES NLGI #2 GC-LB Water Resistant Synthetic Grease

Applications:
Ford:
Bronco, F150: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996