QU40389U USED 1980-1993 Dodge Dana 44 Outer Axle Shaft

QU40389U USED 1980-1993 Dodge Dana 44 Outer Axle Shaft for all 1980-1993 Dodge Dana 44 front axles in Ramcharger, W150, W250, and light duty W350 4x4 trucks. The axle shaft splines on QU40389U are grooved in three places so they will work with all locking hubs and solid drive gears. Available while supplies last.

Also See: QU40389 New Outer Axle Shaft

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Matching U-Joints
Common Axle Shaft Failures
1991 Axle Shafts
Matching Parts
Applications

Tech Note 1: Matching U-Joints
QU40389U Axle Shaft takes universal joints made to Spicer 1350WJ dimensional specifications. The cup diameter for these u-joints is 1-3/16". The 4 cups are grooved to accept Inside C-Clip Snap Rings. The installed Clips fit against the machined inner faces of the axle shaft yokes. The distance between the inside of the axle shaft yoke ears is 2-3/16". For matching u-joints, see TK40712 and QU90007.

Tech Note 2: Common Axle Shaft Failures
Outer axle shaft operating failures are usually a result of either a broken axle u-joint or a dry spindle bearing. Good preventative maintenance can usually prevent those type of failures. A good number of axle shafts are also wrecked by poor service procedures during u-joint replacement. Over the years I have seen a lot of axle shafts with bent or broken yokes caused by the slam-bang u-joint removal and installation methods. A QT1065M C-Frame Press with the correct adapters is both the safest and best way to remove or install axle u-joints.

Tech Note 3: 1991 Axle Shafts
Dana lists odd ball axle shafts for 1991 3/4 tons with axle tag number 610360-2. Dodge parts books do not show this axle so I suspect it was a limited production item for a specialty off road or export application.

Tech Note 4: Matching Parts
Matching parts for QU40389U Used Outer Axle Shaft are:
QU40058 Axle Shaft Slinger
QU40228 Spindle Bearing and Seal Kit
QU40056 Small Spindle V-Seal
QU40070 Spindle Thrust Washer
QU40071 Large Spindle V-Seal
X10000 Spindle Bearing
QU40032 Axle Shaft Snap Ring for manual hubs and drive gears.
QU40648 Left Inner Axle Shaft for 1988-1993 W250 except for 1991 with axle tag number 610360-2
QU40919 Right Inner Axle for all 1980-1993 W250 except for 1991 with axle tag number 610360-2
QU40649 Differential Output Shaft with snap ring groove for All 1985-1993
QU40650 Left Inner Axle Shaft for 1988-1993 W150, Ramcharger, Trailduster
QU40652 Right Inner Axle Shaft for all 1980-1993 W150, Ramcharger, Trailduster
QU40598/QU40428/QU40657 Splined Hub Gears
TK40712 and QU90007 Axle U-Joints
QU56018 Warn Manual Lockout Hub Set
Manuals and Truck Factory Shop Manuals on CD

Applications
Dodge Dana 44 front axles in Ramcharger, W150, W250, and light duty W350 4x4 trucks: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993