QU50509 7260 Series 32 Spline Input or Output Yoke for Dodge NP205

QU50509 7260 Series 32 Spline Input or Output Yoke for Dodge NP205 Transfer Cases fits 1969 to 1974 and 1980 to 1993 gas powered Dodge trucks with Cast Iron New Process NP205 gear drive transfer cases and 7260 series universal joints. For the 1969 to 1974 remote mounted NP205 Transfer Case use on the input or either output shaft. On 1980-1993 trucks with the direct mount NP205, only small block gas V8 engine W-350 1 ton trucks will use this yoke and only on the rear output shaft. 

Also See: QU50509U Used 7260 Series 32 Spline Input or Output Yoke available while supplies last.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Slinger Included
Matching U-Joints
Transfer Case Seal
Matching Parts
Applications

Tech Note 1: Slinger Included
QU50509 comes with a Slinger. Retain the slinger when using this yoke on input or front output shafts. Remove and discard the slinger for rear output applications. The slinger can be pressed or driven off the yoke.

Tech Note 2: Matching U-Joints
QU50509 is made to match with 7260 series u-joints that were originally made by Chrysler's (now defunct) Detroit Universal division. 7260 Series u-joints are retained by internal c-clips that fit against the inside of the yoke ears. Width between the yoke ears is 2-1/8". U-Joint cup diameter is 1.078". Standard Duty U-Joint is QU40751. Heavy Duty U-Joint part number is QU40794.

Tech Note 3: Transfer Case Seal
For NP205 Transfer Cases use Seal TK50123 Seal or TK50092 Seal.

Tech Note 4: Matching Parts
Optional matching parts for QU40746 Yoke are:
Exploded View XV4005 1980-1993 Dodge NP205 Transfer Case
Exploded View XV4006 1969-1974 Dodge NP205 Transfer Case
QU40729 Strap and Bolt Kit to secure the driveshaft universal joint
TK50123 Standard, 2-1/8" ID Original Equipment Type Single Seal
TK50092 NP205 Transfer Case Rear Output or Input Seal
TK10513 Rubber Spline Seal to seal oil from leaking past the inside splines
QK2036 Output Yoke Nut and Washer Set
TK10503 5 Bolt Gasket for Rear Output Bearing Flange
TK10514 4 Bolt Gasket for Front Output or Remote Input Bearing Flanges
S9978 Threadlocker

Applications
Dodge:
Dodge NP205 Transfer Case in 1969-1974 and 1980-1993 Gas Engine Trucks with 7260 series driveshaft u-joints