QU40906 3R Series 16 Spline Greaseable Slip Yoke with Press On Seal

QU40906 3R Series 16 Spline Greaseable Slip Yoke with Press On Seal is made to fit GM and Dodge 3R series front or rear driveshafts that have had the original slip stub replaced by an aftermarket 1-3/8" diameter, 16 spline slip stub. This Yoke WILL NOT fit original equipment fine spline stubs!!!!!

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
7290 Series U-Joints
Spline
Before Installing
Installing
Matching Parts for GM Driveshafts
Matching Parts for Ram 1330CV x 1344 Stock Replacement Driveshafts
Matching Parts for Ram 1350CV x 1344 Stock Replacement Driveshafts
Applications

Tech Note 1: 7290 Series U-Joints
QU40906 Slip Yoke takes 7290 Series u-joints which are retained by internal c-clips that fit against the inside of the yoke ears. Width between the yoke ears is 2-9/16". U-Joint cup diameter is 1-1/8". Standard Duty U-Joint is QU40758. Heavy Duty U-Joint part number is TK40725.

Tech Note 2: Spline
QU40906 typically mates to 16 spline slip stubs that have 1.375" outside diameter partial length splines (spline length is usually 2.25" to 3"). The yoke measures 7-3/8" from the center of the u-joint hole to the end of the spline.

Tech Note 3: Before Installing
Install the press-on seal BEFORE trying to install the Slip Yoke on the splined slip stub.

Tech Note 4: Installing
The Slip Yoke and weld Yoke at the opposite end of the tube MUST be in phase (See TM3000 Driveshaft Manual).

Tech Note 5: Matching Parts for GM Driveshafts
Saved for Future Use

Tech Note 6: Matching Parts for Ram 1330CV x 1344 Stock Replacement Driveshafts
Exploded View XV508 2003-2013 Ram 2500 and Ram 3500 Front CV Driveshaft
QU40131 1330 Series Front CV Flange Yoke Assembly
QU10806 Grade 8 Driveshaft Bolt
QU40829 CV Ball Seal
QU40835 CV Joint Tension Spring
QU40744 CV Ball and Seal Kit
QU40774 Greaseable 1330 Series U-Joint
QU40759 CV Center H Yoke
QU40704 CV Joint Ball Seal
QU40963 CV Ball Stud Tube Yoke
TK40980 2.5" x 0.083" Wall Driveshaft Tubing
QU40936 Front CV Slip Stub
QU41006 Slip Yoke Press-On Seal
QU40758 Greaseable S44 U-Joint
QU50232 Serrated Flange Yoke
QU70008 Hex Head Bolt, CV Driveshaft to Axle Flange
QK3072 Custom Rebuild Kit

Tech Note 7: Matching Parts for Ram 1350CV x 1344 Stock Replacement Driveshafts
Exploded View XV508 2003-2013 Ram 2500 and Ram 3500 Front CV Driveshaft
QU40990 1350 Series Front CV Flange Yoke
QU10806 Grade 8 Driveshaft Bolt
QU40829 CV Ball Seal
QU40835 CV Joint Tension Spring
QU40744 CV Ball and Seal Kit
QU40731 1350 Series Greaseable U-Joint
QU40800 CV Center Yoke
QU40704 CV Joint Ball Seal
QU40825 Greaseable CV Ball Stud Tube Yoke
TK40980 2.5" x 0.083" Wall Driveshaft Tubing
QU40936 Front CV Slip Stub
QU40936 Slip Stub
QU41006 Slip Yoke Press-On Seal
QU40758 Greaseable S44 U-Joint
QU50232 Serrated Flange Yoke
QU70008 Hex Head Bolt, CV Driveshaft to Axle Flange
QK3043 Custom Rebuild Kit

Applications
3R Series that had original slip stub replaced by an aftermarket 1-3/8” diameter, 16 spline slip stub

GM:
2003, 2004, 2005, 2006, 2007, 2008, 2009

Dodge:
2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010