TK3035 Front CV Driveshaft Master Rebuild Kit for 1999 Dodge

TK3035 Premium Torque King® Front Driveshaft Master Rebuild Kit for 1999 Dodge with Front Conversion U-Joint with 2 inside C-Clips & 2 external snap rings found in Dodge Ram 1500, Dodge Ram 2500, and Dodge Ram 3500 4x4 trucks. TK3035 Kit includes 3 Torque King U-Joints with Cold-Forged Crosses, Premium CV Flange Yoke with Ball/Socket, 4 Boot Clamps for Slip Yoke (2 early, 2 late), and Blue Threadlocker. This Kit is a Front Driveshaft Constant Velocity Overhaul Kit with one special 1330 X 7290 Front U-Joint that is specific to 1999. CV Parts are the same for all years, however, Dodge used three different front u-joints so if your shaft is not original, check your front u-joint configuration before ordering!!!

This Kit includes three Torque King® universal joints (one is a conversion u-joint), new QU40131 CV Flange Yoke Assembly, QU40704 Dust Seal, 2 each early and late driveshaft boot clamps, and S9978 Threadlocker.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Front U-Joint
Driveshaft Rebuild Manual
Matching Parts
Applications

Tech Note 1: Front U-Joint
The CV Joint is the same for all 1994-2001 Ram 1500 and 1994-2002 Ram 2500/3500, however, the front u-joint (and our Kit number) will vary by year. Always verify your front u-joint type before ordering, especially on 1998-2000 model year vehicles as the front u-joint may vary between early and late production trucks in each year for certain engine/transmission/transfer case combinations!
The 3 Front U-Joint Types:
1994-1998: Detroit 7290 U-Joint with four 1-1/8" diameter cups. All four Cups are retained by C-Clips that seat against inside of yoke ears. Inside span between yoke ears is 2-5/8". Slip Stub has 30 splines. Use TK3030 Kit.
1999: Conversion U-Joint with two 1-1/8" diameter cups and two 1-1/16" Cups. 1-1/8" Cups are retained by C-Clips that seat against inside of yoke ears. 1-1/16" cups will have external snap ring if in slip yokes, or if attaching to pinion yoke, ends of cups are retained by lugs cast in pinion yoke. Slip Stub has 15 or 16 splines. (Some early production shafts have 30 spline slip stubs, for these order QU40085 and QU50138 Slip Yoke Boot Clamps separately). Use TK3035 Kit.
2000-2002: Spicer 1330 U-Joint with four 1-1/16" diameter cups. Two cups in driveshaft slip yoke will have external snap rings. No snap rings are used on pinion yoke as ends of cups are retained by lugs cast in pinion yoke. Width of u-joint measured across installed width of cups is 3-5/8". Slip Stub has 15 or 16 splines. Use TK3036 Kit.

Tech Note 2: Driveshaft Rebuild Manual
Optional, Year Specific Front Driveshaft Rebuild Manuals:
1994-1998 with Front U-Joint which uses 4 Inside Lockup Snap Rings. TM3304 Technical Manual.
1999 with Front Conversion U-Joint with 2 inside C-Clips & 2 external snap rings. TM3317 Technical Manual.
2000-2002 All three u-joints are the same. TM3317 Technical Manual.

Tech Note 3: Matching Parts
QU40763 Strap and Bolt Kit for 1994-1999 with 1-1/8" cup size in pinion yoke
QU40735 Strap and Bolt Kit for 2000-2002 with 1-1/16" cup size in pinion yoke (also some late 1999)
QU10806 Special Grade 8 Bolt with Washer to attach CV end to transfer case
QK3078 Slip Yoke Boot Kit for 1994-1999.5
QU40132 Slip Yoke Boot Kit for 1999.5-2002
QU11074 Pinion Yoke 1994-1999 (1-1/8" cup size)
QU40379 Pinion Yoke 2000-2002 (1-1/16" cup size)
QU90018 Pyroplex Plus Synthetic Grease
QU40806 Unfinished Greaseable Front CV Shaft Assembly
QU40807 Ball Stud Tube Yoke
QU40846 CV Head Assembly
TM3000 80 Page Color Illustrated 4x4 Driveshaft Service Manual
U-Joint Tools Web Page
Dodge & Ram Shop Manuals

Applications:
Dodge:
Ram 1500, 2500, 3500 (Verify Front U-Joint Type): 1999