QU20281U Used Dana 50IFS Right Axle Beam 1980-1997 Ford F250, F350

QU20281U Right Ford Dana 50IFS Axle Beam is an inexpensive good used passenger side bare Axle Beam for 1980-1997 F250 and 1980-1985 F350 4x4s with Dana 50IFS front axles. These good used axle beams are taken from axle assemblies our Research and Development Department had for part verification and tool design purposes. Available while supplies last.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
GVW F250 Dana 50IFS
Pivot Bushing
Ball Joints
Camber Bushing
Matching Parts & Tools
Applications

Tech Note 1: GVW F250 Dana 50IFS
F-250 4x4s were available with either the 3800/3850 pound capacity Dana 44IFS or the optional 4600 pound rated Dana 50IFS Independent Front Suspension Twin Traction Beam® front drive axles. QU20281 Axle Beam only fits the heavy GVW F250s with Dana 50IFS front axles. If you are not sure which axle your F250 has, look at the front hubs. Dana 44 front hubs have an outside diameter roughly 3-3/8". Dana 50IFS axle hub diameter is about 4-1/8".

Tech Note 2: Pivot Bushing
I recommend you replace the Axle Beam Pivot Bushing with a new QU50097 Axle Beam Pivot Bushing before installing one of these Used Axle Beams.

Tech Note 3: Ball Joints
This Axle Beam does not include Ball Joints. Order QK4561 Complete Ball Joint Set or QU50095 Upper and QU50056 Lower Individual Ball Joints.

Tech Note 4: Camber Bushing
The axle beams were the same for 1980-1997 axles, but different replaceable upper ball joint camber bushings were used depending upon the year and suspension. In many, perhaps most cases, the original camber bushing was replaced during a front end alignment at some point in the vehicles history. If possible, install the camber bushing from your old axle beam in the replacement beam, then have your front end aligned by a competent front end specialist who can check and change toe-in, camber, and caster as needed.

Tech Note 5: Matching Parts and Tools
Interactive Exploded View XV1010DT 1995, 1996, 1997 Ford F250 Dana 50IFS Axle
QU50097 Axle Beam Pivot Bushing
QK4561 Ball Joint Set (2 Uppers and 2 Lowers)
QA50095 Upper Ball Joint
QU50056 Lower Ball Joint
QU20280U Used Left Axle Beam
QU40087 Dana OE Left Axle Shaft Seal (1980-1997)
QU40088 Dana OE Right Axle Shaft Seal (1983-1997)
TS4511 Ball Joint Press Set
QU90009 Universal Axle Service Pack (Threadlocker, RTV Sealant, Gear Marking Compound, & Brush)
S24200 Medium Strength Threadlocker
S82194 Ultra Gray RTV Sealant

Applications:
Ford:
F-250 with the optional Dana 50IFS Front Axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
F-350: 1980, 1981, 1982, 1983, 1984, 1985, 1985.5