Description
QU11035 Dodge W200, W250 Front 8 Bolt Hub and Rotor Assembly is a genuine, New Old Stock (NOS) original equipment part for all 1974-1979 Dodge W-200 and W-250 4x4 trucks with the Dana 44 Live Spindle Front Axle. These are ready to install, factory built units that have the wheel hub, brake rotor, and wheel studs. QU11035 does NOT include the wheel bearings or wheel seals. USA Made.
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Loose Wheel Bearings
Matching Parts
Applications
Tech Note 1: Loose Wheel Bearings
Loose wheel bearings are a common problem with the 1974-1979 Dodge Dana 44 Live Spindle front axle. Since the bearings are not adjustable, it only takes about 0.005" combined total wear on your wheel bearings, wheel hub, bearing retainer, and/or steering knuckle to have loose wheel bearings. I worked on a lot of these Dodge trucks in the 1970's and 1980's and I found worn hubs on probably close to 50% of the vehicles with loose wheel bearings. If BOTH the inner and outer wheel bearings are not a tight press fit on your old Hub, you MUST replace it with a new part!
Tech Note 2: Matching Parts
Matching Parts for QU11035 Dodge Hub and Rotor:
QU50205 Wheel Bearing Set with Spacer
QU50206 Outer Wheel Seal
QU40268 Wheel Bearing Retainer
QU40074 Inner Wheel Seal
QK4732 Axle Shaft Nut and Washer
QT1008 Axle Shaft Nut Socket
Applications
Dodge:
W200, W250 with Dana 44 Full Time Front Axle: 1975, 1976, 1977, 1978, 1979
Warranty
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.
