QU10889 29 Spline Input Shaft 1994-2002 Dodge NP241 Transfer Cases

QU10889 29 Spline x 5-3/64" Long NP241 NP241DLD, NP241DHD Transfer Case Input Shaft for 1994-2002 Dodge Ram 2500, Ram 3500 Use with QU50873 Wide (15/16") Input Bearing. This USA made, genuine New Process original equipment replacement part includes factory installed Input Shaft to Mainshaft Needle Pilot Bearing. Fits all 1999.5, 2000, 2001, and 2002 Dodge Ram 2500 and Ram 3500 NP241DLD or NP241DHD Transfer Cases in 4x4 trucks with Diesel or V10 engines and manual transmissions. Fits some 1994 to 1997 with Diesel or V10 engines and manual transmissions. QU10889 29 Spline Input also fits late 2000-2002 NP241DHD Transfer Cases in gas V8 powered Dodge Ram 2500 and Ram 3500 4x4 trucks with 29 spline output NV4500LD manual transmissions. USA Made.

Also See QU50477 Aftermarket Replacement 29 Spline Input Shaft

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Assembly Numbers 
Planetary Tooth Cut
Input Bearing Width 
Pilot Bearing 
Synchro Clutch Teeth 
Transmission or Transfer Case Swaps 
Replacing 23 Spline with 29 Spline 
1994-2002 NP241DLD Matching Parts 
1994-2002 NP241DHD Matching Parts 
Applications

Tech Note 1: Assembly Numbers 
QU10889 29 spline Input Shaft was used on these Dodge NP241 transfer case assembly numbers: 52098504, 52098512, 52098676, 52098678, 52105024AB, 52105024AC, 52105024AD, 52105027AB, 52105027AC, and 52105027AD. QU10889 will also replace 29 spline input gears on these assemblies with wide tooth planetary gears: 52099030, 52099035, 52099037, 52098530, 52098534.

Tech Note 2: Planetary Tooth Cut
Many early production (1994-1995 and possibly some very early 1996) Ram 2500, Ram 3500 4x4 trucks with New Process NP241DLD and NP241DHD transfer cases have a wide cut planetary gear set. While the planetary gear tooth profile is visibly different than narrow cut teeth used through 2002, the diameters of the 3 pieces (Input, Planetary, Annulus) are also slightly different. See Help Article IDN-400 for more information.

Tech Note 3: Input Bearing Width
1994-2002 Dodge Ram NP241DLD and NP241DHD Transfer Cases were built with input shafts  using either a narrow (5/8” wide, Single Row) or wide (15/16” wide, Double Row) Input Ball Bearing. While a narrow bearing cannot be used on an input made for the wide bearing and visa-versa, the combined matching bearings and shafts are totally interchangeable. For example, If you are doing a manual transmission swap on a 1998 Automatic transmission equipped Cummins powered truck with NP241DHD Assembly number 52105028, you can replace the original QU50640 input shaft/QU50874 Narrow Bearing with QU10889 29 Spline Input/QU50873 Wide Bearing. Need more info? See IDN-401 Input Bearing Tech.

Tech Note 4: Pilot Bearing
The Input Shaft to Mainshaft Pilot Bearing is included with this Input Shaft. Your matching Mainshaft (Rear Output Shaft) will have a Pilot Diameter of 1-5/16". An optional steel adapter ring for using this input with smaller transfer cases like the NP231 will be available soon. 

Tech Note 5: Synchro Clutch Teeth
The Input Shaft Synchro Clutch Teeth are machined inside the back of the Input Shaft. The Sliding Clutch Collar will engage the Synchro Clutch Teeth in High Range. Single Cut teeth are beveled in one direction. Double Cut Teeth are beveled the same to left and right. Input Shafts with single cut Synchro teeth were only used on 1999.5 to 2002 NP241DLD and NP241DHD models on vehicles with automatic transmissions and some 2002 cases in manual transmission Ram trucks without the vacuum controlled Central Axle Disconnect (CAD). The actual engineering reason using the single cut tooth profile for late production automatic equipped models is not known by us, but except for manual transmission assembly 52105027AD used in 2002 trucks without Central Axle Disconnect and 52105028AB assemblies for 2001-2002, all 1998-2002 NP241DHD transfer cases using the single cut input use the same Sliding Range Sleeve (QU50150) as all the other NP241DHD applications.  Since range shifting is usually done with the vehicle stopped and the transmission in park (auto) or neutral (manual), the cut of the synchro teeth is not usually an issue. (Click Here for Detailed Photo)

Tech Note 6: Transmission or Transfer Case Swaps
One of the more common swaps people do is to install a NV4500HD 5 speed or NV5600 6 speed manual transmission in place of an automatic in their Diesel Dodge Ram 4x4. To do this requires changing the input shaft from the original 23 spline to a 29 spline. If you have a 1999.5-2002 241DLD or 241DHD that uses a wide (15/16") Input Bearing, this is the 29 spline shaft to use. For 1994-1997, it is not so cut and dried. These years had a total of four possible choices depending upon the input bearing width and cut of the planetary gears, so we have to have the transfer case assembly number to verify what input shaft you need. Strangely, this Input Shaft was NOT used in any 1998 model year Transfer Cases as all units in that year took the narrow bearing. For a 29 Spline Input Shaft for a Narrow (5/8") Bearing, see QU10699.

Tech Note 7: Replacing 23 Spline with 29 Spline 
If you are replacing a 23 spline automatic transmission or NV4500LD with a 29 spline NV4500HD or NV5600 manual transmission, use this 29 spline input shaft if your transfer case assembly number is one of these: 52098503, 52098505, 52098675, 52098677, 52105023AB, 52105025AB, 52105025AC, 52105025AD, 52105026AB, 52105028AB, 52105028AC, 52105028AD.

Tech Note 8: 1994-2002 NP241DLD Matching Parts
Exploded View XV4002 1994-1997 Dodge Ram NP241DLD Transfer Case
Exploded View XV4004 1998-2002 Dodge Ram NP241DLD Transfer Case
QU50873 Input Ball Bearing, 15/16" Thick
QU10893 Snap Ring, Input Bearing to Input Shaft
QU10857 Input Seal
QU10572 Input Shaft to Planet Thrust Washer (uses 2)
QU50153 Planetary Assembly, most 1994-1996 NP241DLD and all 1997-2002
QU50152 Range Sliding Sleeve
Dodge & Ram Shop Manuals

Tech Note 9: 1994-2002 NP241DHD Matching Parts
Exploded View XV4000 1994-1996.5 Dodge Ram NP241DHD Transfer Case
Exploded View XV4001 1996.5-1997 Dodge Ram NP241DHD Transfer Case
Exploded View XV4003 1998-2002 Dodge Ram NP241DHD Transfer Case
QU50873 Input Ball Bearing, 15/16" Thick
QU10893 Snap Ring, Input Bearing to Input Shaft
QU10857 Input Seal
QU10572 Input Shaft to Planet Thrust Washer (uses 2)
QU50494 Planetary Assembly, most 1994-1996 NP241DHD and all 1997-2002
QU50150 Range Sliding Sleeve
Dodge & Ram Shop Manuals

Applications
Dodge Ram:
Ram 2500, Ram 3500 with Manual Transmission and either Diesel or V-10 transmission and Input that takes 15/16" Thick Input Bearing: 1994, 1995, 1996, 1997
Ram 2500 and Ram 3500 with Manual Transmission and either Diesel or V-10 transmission: 1999.5, 2000, 2001, 2002
Ram 2500 and Ram 3500 with gas V8 and manual transmission with 29 spline output: 1999.5, 2000.5, 2001, 2002