Tools 1985-1997 Ford F350 Dana 60

QT1119 14" Pro Duty Installer Driver Handle with knurled hand grip are used QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8'" center holes. 1.25" diameter x 14" usable length for deep seated seals and bearings. Made in...

QT1032 USA Made Dana 25-Dana 80 Differential Case Spreader for Dana-Spicer Axles Dana Axles are designed to have a differential bearing preload of .010"-.015". With our Case Spreader, removing and installing front and rear differentials on your 4x4 is...

QT1812 Outer Pinion Bearing Cup Installer is used to install many of the Bearing Cups used in Chevy, Dodge, Ford, GMC, and Jeep SUV's, 1/2, 3/4 and 1 ton trucks from 1942 to current. QT1812 fits our QU50400 (Dana Axle Outer Pinion), QU50539 (Inner or...

QT1505 1980-1997 Dana 50,  1969-1997 4x4 Front Wheel Seal Installer, and 1959-1970 Jeep Dana 70 Rear Wheel Seal Installer is specifically made to quickly and safely install QU40119 Wheel Seals in the back of your heavy duty 4x4's front hub or...

QT1088 Press Step Plate for Differentials for Dana 60, Dana 70, Dana 70HD, Dana 80, Ford 10.25", Ford 10.5", GM 14 bolt axles is used when pulling and/or installing your differential bearings. These plates fit in the axle shaft hole of your...

QT1110 USA Made, Heavy Duty, 1/2" Drive, USA Made 4 Lug Spindle Nut Wrench for Dana 50 and Dana 60 Front Axles fits Dana Spicer 50, 60, and 61 front drive axles with 4 slot double spindle nuts (QK4729) and serviceable wheel bearings from 1981-1997...

QT1158 Differential Bearing Installer for all 2003-current AAM 10.5" Dodge Ram 2500 rear axles, all 1973-current AAM/GM 14 bolt, 10.5" ring gear rear axles, all Dana-Spicer Model 60 and 61 front or rear axles, plus all standard Model 70 axles that use...

QT1222 Dana 50, Dana 60 Universal Adjustable Depth Inner Axle Seal Installer is specific to 2011-up Ford Super Duty Dana Super 60 axles, but it will work equally well to install QU20463 Oil Bath Inner Axle Seal in 1975-2010, open knuckle Dana 60...

QT1024 4x4 Triple Metric and Standard Thread Spindle Puller fits any 5/8" Slide Hammer to quickly and easily remove those rusted in front wheel bearing spindles on your 4x4 without damage! Essential for servicing axle u-joints, ball joints, spindle...

QT1064 King Pin Socket for 1975-1993 Dana 60 Open Knuckle, King Pin Type Front Axles removes and installs the upper king pin cones on Model 60 front axles found on many ¾ and 1 ton trucks from 1975 to 1993. Both the 3/4" drive socket and hex bit...

QT1130 Inner Axle Seal Installer Thrust Plate for Dana 60, Dana 61, Super 60, and Dana 70 Front Axles Fits all Dana Model 60, Super 60, 61, and Closed Knuckle Model 70 axles from 1957-current. QT1130 is placed against the differential bearing bore face...

QT1805 3-1/2" Wheel and Pinion Bearing Cup Installer is used to install many of the Bearing Cups used in Chevy, Dodge, Ford, GMC, International, and Jeep 3/4 and 1 ton trucks from 1954 to current. Use QT1805 for QU50406, QU50570, QU50606, (inner...