Tools 1977-1991 GM Dana 60

QT1119 14" Pro Duty Installer Driver Handle with knurled hand grip are used QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8'" center holes. 1.25" diameter x 14" usable length for deep seated seals and bearings. Made in...

QT1812 Outer Pinion Bearing Cup Installer is used to install many of the Bearing Cups used in Chevy, Dodge, Ford, GMC, and Jeep SUV's, 1/2, 3/4 and 1 ton trucks from 1942 to current. QT1812 fits our QU50400 (Dana Axle Outer Pinion), QU50539 (Inner or...

QT1505 1980-1997 Dana 50,  1969-1997 4x4 Front Wheel Seal Installer, and 1959-1970 Jeep Dana 70 Rear Wheel Seal Installer is specifically made to quickly and safely install QU40119 Wheel Seals in the back of your heavy duty 4x4's front hub or...

QT1110 USA Made, Heavy Duty, 1/2" Drive, USA Made 4 Lug Spindle Nut Wrench for Dana 50 and Dana 60 Front Axles fits Dana Spicer 50, 60, and 61 front drive axles with 4 slot double spindle nuts (QK4729) and serviceable wheel bearings from 1981-1997...

QT1088 Press Step Plate for Differentials for Dana 60, Dana 70, Dana 70HD, Dana 80, Ford 10.25", Ford 10.5", GM 14 bolt axles is used when pulling and/or installing your differential bearings. These plates fit in the axle shaft hole of your...

QT1064 King Pin Socket for 1975-1993 Dana 60 Open Knuckle, King Pin Type Front Axles removes and installs the upper king pin cones on Model 60 front axles found on many ¾ and 1 ton trucks from 1975 to 1993. Both the 3/4" drive socket and hex bit...

QT1158 Differential Bearing Installer for all 2003-current AAM 10.5" Dodge Ram 2500 rear axles, all 1973-current AAM/GM 14 bolt, 10.5" ring gear rear axles, all Dana-Spicer Model 60 and 61 front or rear axles, plus all standard Model 70 axles that use...

TS4867 Dana 60 Fixed Depth Inner Axle Seal Tool Set Quickly and easily installs QU40059 Inner Axle Seal to a precise depth in all Chevy, Dodge, Ford, GMC, and International 4x4 trucks with open knuckle Dana 60 and Dana 61 front drive axles with King...

QT1130 Inner Axle Seal Installer Thrust Plate for Dana 60, Dana 61, Super 60, and Dana 70 Front Axles Fits all Dana Model 60, Super 60, 61, and Closed Knuckle Model 70 axles from 1957-current. QT1130 is placed against the differential bearing bore face...

QT1222 Dana 50, Dana 60 Universal Adjustable Depth Inner Axle Seal Installer is specific to 2011-up Ford Super Duty Dana Super 60 axles, but it will work equally well to install QU20463 Oil Bath Inner Axle Seal in 1975-2010, open knuckle Dana 60...

QT1805 3-1/2" Wheel and Pinion Bearing Cup Installer is used to install many of the Bearing Cups used in Chevy, Dodge, Ford, GMC, International, and Jeep 3/4 and 1 ton trucks from 1954 to current. Use QT1805 for QU50406, QU50570, QU50606, (inner...

QT1016i 1/2" Drive 6 Lug Front or Rear Spindle Nut Socket fits all 6 slot Dana Spicer 50/Model 60 front axles, 1946-1972 GM H052, H072 Rear Axles, 1973 to 2010 GM 14 Bolt full float rear axles with 6 hole/slot rear spindle nuts and 2003 to 2018 Dodge...