- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
QK4727 Dana 30 & Dana 44 Front Spindle Nut Kit with Round 4-Slot & 1-5/8" Thread Nuts
4727$27.98QK4727 4 Slot Dana 30, Dana 44, GM 10 Bolt Front Spindle Nut Kit includes one each genuine original equipment QU40004 Inner Spindle Nut, QU40060 Spindle Nut Lock Washer, and QU40031 Outer Spindle Nut which fit many Dana 30 (Ford Bronco) Dana 44 (All... -
QU40228 Spindle Bearing and Seal Kit for Dana 30, 44, 44IFS, GM 10 Bolt
40228$31.98QU40228 Spindle Bearing and Seal Kit for Dana 30, Dana 44, Dana 44IFS, and GM 10 Bolt Open Knuckle Front Axles includes genuine original equipment spindle bearing, spindle seals, and axle shaft thrust washer to service ONE Spindle. QU40228 fits... -
QU40058 2-1/4" 4x4 Outer Axle Shaft Slinger for Dana 30, Dana 44, GM 10 Bolt
40058$5.98QU40058 2-1/4" 4x4 Outer Axle Shaft Slinger for Dana 30, Dana 44, and GM 10 Bolt Front Axles acts as both a dirt deflector and a sealing surface on open knuckle axles. Replace anytime they are dinged, bent, or badly corroded. QU40058 is a genuine... -
QU40071 Large Outer Axle Shaft to Spindle V-Seal Dana 30, 44, GM 10B
40071$7.98QU40071 Large Axle Shaft to Spindle V-Seal is a genuine original equipment 2.25" ID Rubber V-Seal that seals between your axle shaft and spindle. Fits most Mid 1970's to 1993 SUV, 1/2, and standard 3/4 ton Model 30, 44, 44IFS, and GM 10 bolt open... -
QU40070 Plastic Front Axle Shaft to Spindle Thrust Washer
40070$6.98QU40070 Axle Shaft to Spindle Thrust Washer is a genuine original equipment plastic thrust washer that controls axial thrust between your outer axle shaft and spindle. Fits most Mid 1970's to 1993 SUV, 1/2, and standard 3/4 ton Model 30, 44, 44IFS, and... -
Dana 30/44 4-Lug 4x4 Front Spindle Nut Socket QT1012i
991012$19.98QT1012i Value 4 Lug 4x4 Front Spindle Nut Socket is a durable, 1/2" drive special socket that fits 4 slot spindle nuts used on many axles from the late 1950's to 1996 including Dana 28IFS, Dana 30, Dana 35IFS, Dana 44, Dana 44IFS, Dana 60, and GM 10... -
QU40004 4x4 Front 4 Slot Inner Spindle Nut with Pin Thread Size 1-5/8"
40004$24.98QU40004 4x4 Front, 4 Slot Inner Spindle Nut with Pin is a genuine original equipment part for many Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy/GMC) and 1973-1977 Ford F-250 Crew Cab Dana 60 closed knuckle front drive axles. This nut was... -
QU40060 Round Spindle Lock Washer
40060$4.98QU40060 Round Spindle Lock Washer for Dana 28IFS, Dana 30, Dana 35IFS, Dana 44 (All Makes), Dana 44IFS, 1973-1977 Ford F-250 Crew Cab Dana 60 front drive axles, and GM 10 (Chevy/GM) Bolt Front Axles. This washer was used between the inner and outer... -
QK4734 Pair of Spindle Bearings for Dana 30, Dana 44, GM 10 Bolt Front Axles
4734$26.98QK4734 Front Axle Shaft Spindle Bearing Set fits late 1960's to 1990's Dana 30, Dana 44, and GM 10 Bolt front axles, plus 1976-1977 Ford F-250 crew Cab Dana 60 axles. One bearing is pressed into each spindle to support the outer axle shaft. USA Made... -
QU40056 Small Spindle to Axle Shaft V-Seal
40056$9.98QU40056 Small Spindle to Axle Shaft V-Seal is a genuine original equipment 1-5/16" ID Rubber V-Seal that is installed in your spindle between QK4734 Spindle Bearing and QU40070 Spindle Thrust Washer. Fits most Mid 1970's to 1993 SUV, 1/2, and standard... -
QA4727U Good Used 4 Slot Front Spindle Nut Kit
554727$13.99QA4727U Good Used 4 Slot Front Spindle Nut Kit includes one each QU40004U Inner Spindle Nut, QU40060U Spindle Nut Lock Washer, and QU40031U Outer Spindle Nut which fit many Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy/GMC), and 1974-1977... -
QT1024 4x4 Triple Metric and Standard Thread Spindle Puller, USA Made
1024$160.98QT1024 4x4 Triple Metric and Standard Thread Spindle Puller fits any 5/8" Slide Hammer to quickly and easily remove those rusted in front wheel bearing spindles on your 4x4 without damage! Essential for servicing axle u-joints, ball joints, spindle...