QT1106 2" Spindle Thrust Plate for use with a Hub Puller

QT1106 2" Spindle Thrust Plate can be used in conjunction with a suitable puller to remove a stuck wheel hub or seal ring from almost any 2" diameter full-floating axle spindle if the hub will not pull off by hand. Spindle Thrust Plate is machined by us here in Montana. Most 1985 and newer 3/4 ton and 1 ton Chevy, Dodge, Ford, GMC, and Ram full-floating rear axles with oil bath type wheel seals may require a puller to remove the hub from the spindle and also pull off the inner seal ring. Made in U.S.A.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Matching Parts
Applications
CAD Drawing

Tech Note 1: Matching Parts
QT1025 Spindle Nut Socket

Applications
(Incomplete Listing)

Chevy and GMC:
2500, 3500 with AAM Full-Float Rear Axles: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

Ford:
F250, F350 with Sterling 10.25" Rear Axle: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
F250, F350 with Sterling 10.5" Rear Axle: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
F250, F350 with Dana M275 SRW Rear Axle: 2017, 2018, 2019, 2020, 2021, 2022, 2023
F350, F450, F550 with Dana M300 DRW Rear Axle: 2017, 2018, 2019, 2020, 2021, 2022, 2023

RAM:
Ram 3500 DRW Rear Axles with 2" Spindle Ends: 2019, 2020, 2021, 2022
Ram 3500 Pickup DRW Rear Axles with 2-1/2" Spindle Ends: 2019, 2020, 2021, 2022

CAD Drawing is a Large File that may take Longer to Load