QU50619U Used 1310 Series CV Output Yoke for 1974-1979 Ford NP203, NP205

QU50619U Used 1974-1979 Ford New Process NP203, NP205 Transfer Case 1310 Series CV Output Yoke for 1974-1979 New Process NP203 or NP205 transfer cases in Ford Bronco and F-series 4x4 models. This 32 spline yoke will fit any NP203 or NP205 transfer case with 32 spline shafts, but it was primarily used on Ford applications as a front output yoke, but some models also used it on the rear output shaft. Available while supplies last.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
U-Joint Specs
Matching Parts
High Performance Applications
Applications

Tech Note 1: U-Joint Specs
QU50619U is made for constant velocity joints using external snap ring type universal joints made to Spicer 1310 series dimensional specifications. The u-joint cup diameter is 1-1/16". The overall width is 3-7/32". For u-joints, see TK40720 and QU40769.

Tech Note 2: Matching Parts
Optional matching parts for QU50619U Yoke are:
QU50543 Output Seal
QU10512 Output Flange Nut
TK10513 Spline Seal
TK10503 5 Bolt Gasket for Rear Output Bearing Flange
TK10514 4 Bolt Gasket for Front Output or Remote Input Bearing Flanges
S9978 Threadlocker

Tech Note 3: High Performance Applications
For high performance rear output applications, I recommend you replace your weak original NP205 32 spline rear output shaft with our TK50084 shaft. The redesigned, stronger part which was exclusively used in 1989-1993 Dodge Cummins Diesel Trucks with 5 speed manual transmissions.

Applications
Ford:
Bronco and F-Series 4x4 Models with New Process NP203 or NP205 Transfer Cases: 1974, 1975, 1976, 1977, 1978, 1979