Description
QA4727U Good Used 4 Slot Front Spindle Nut Kit includes one each QU40004U Inner Spindle Nut, QU40060U Spindle Nut Lock Washer, and QU40031U Outer Spindle Nut which fit many Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy/GMC), and 1974-1977 Ford F-250 Crew Cab Dana 60 front drive axles. This nut was used as the inner spindle nut on most SUV's, 1/2 ton and 3/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings from the late 1950's to the early 1990's. Dodge used it from 1969-1974. Jeep J-series full size 4x4s also used these parts from 1973-1989. Available while supplies last.
Also See: QK4727 New 4 Slot Front Spindle Nut Kit
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Fitment
Installation
Tool
Applications
Tech Note 1: Fitment
QA4727U Spindle Nut Kit fits spindles with thread diameters of 1-5/8".
Tech Note 2: Installation
The pin that protrudes from the outboard face of QU40004U Inner Spindle Nut is an anti-rotation device that engages with one of the holes in QU40060U Spindle Lock Washer. Installing the lock washer without having the pin engage one of the holes will either break or bend the pin. Improperly installed nuts and washer sets can back off during vehicle operation and possibly cause the hub and wheel assembly to fall off which may lead to severe injury or death.
Tech Note 3: Tool
Use with QT1012 or QT1025 Spindle Nut Sockets. The spindle nut tightening procedure and torque specification varies widely depending upon the year and model. Consult a factory shop manual for your vehicle.
Applications:
Chevy/GMC:
1/2 ton and 3/4 ton trucks with Dana 44 or GM 10 Bolt front axles with serviceable wheel bearings: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Dodge:
1/2 ton ton trucks with Dana 44 front axle and serviceable wheel bearings: 1969, 1970, 1971, 1972, 1973, 1974
Ford:
Broncos with Dana 30 front axle : 1966, 1967, 1968, 1969, 1970, 1971
Bronco with Dana 44 Front Axle: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979
F100, F150, F250 1/2 ton and 3/4 ton trucks with standard Dana 44 front axle and serviceable wheel bearings: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979
F250 Crew Cab Dana 60 Front Axle: 1974, 1975, 1976, 1977
F150, Bronco with Manual Hubs and Round Spindle Nuts: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
F250 with Dana 44IFS Front Axle, Manual Hubs and Round Spindle Nuts: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
International:
1/2 ton 1100 and 1110 series 4x4: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973
Jeep J-Series Full Size 4x4s:
Wagoneer, Cherokee, Cherokee Chief, J10, J20 Dana 44 front axles: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Warranty
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.