QU40849U Used 26 Spline 1310 Series Pinion Yoke

QU40849U Good Used 1310 Series Pinion Yoke for Dana 30, Dana 44, Dana 44IFS, and Dana 50IFS Axles is a good used, USA Made, u-bolt style pinion yoke for front or rear Dana axles with 26 spline pinions on vehicles from the 1960s to the 1990s. Use with QU40768 U-Bolt Kit. Includes pinion slinger made to match QU40215 Pinion Seal. Available while supply lasts!

Also See: QU40849 New 1310 Series Pinion Yoke
Also See: QU40734 Strap and Bolt Style Yoke

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
External SR U-Joints
Apply Threadlocker
Grease
Matching Parts
Shims
Alternative Parts
Applications

Tech Note 1: External SR U-Joints
QU40849U takes external snap ring universal joints made to Spicer 1310 series dimensional specifications. The u-joint cup diameter is 1-1/16". The overall width is 3-7/32". For matching u-joints, see TK40720 Torque King® premium non-greaseable universal joint or QU40784 greaseable u-joint with flexible nitrile rubber seals.

Tech Note 2: Apply Threadlocker
To keep the u-bolts from becoming rust frozen in your new pinion yoke, apply S9975 Anti-Seize to the unthreaded portion of the legs. Put some S9978 Threadlocker on the nut threads before installing the nuts on the u-bolts. This is such a minor step, but you will be glad you did!

Tech Note 3: Grease
Grease the seal lip and pinion yoke seal surface to provide initial lubrication prior to installing the yoke on the axle.

Tech Note 4: Matching Parts
QU40215 Pinion Seal
QU40009 Pinion Nut
QU40010 Pinion Washer
QU40002 Outer Pinion Slinger
QU40768 U-Bolt Kit
TK40720 or QU40784 U-Joints
S9975 Anti-Seize
S9978 Threadlocker

Tech Note 5: Shims
Pinion bearing pre-load on axles that would have had this pinion yoke as original equipment was set by shims.

Tech Note 6: Alternative Parts
QU40849 New 1310 Series Pinion Yoke, U-Bolt Style
QU40734 New 1310 Series Pinion Yoke, Strap & Bolt Style

Applications:
Chevy and GMC:
All K5 Blazer/Jimmy, K10/K15/K1500 and K20/K25/K2500 with 26 spline Dana 44 Front Axle: 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981

Dodge:
Front Dana 44 converted to 1310 U-Joint: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
Ramcharger, W100, and W200 with Spicer front CV driveshaft: 1974, 1975, 1975.5

Ford:
Bronco and F100/F150 with Dana Front Axle and 1310 U-Joint: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979
F250 with Full Time Transfer Case and 1310 U-Joint: 1973, 1974, 1975, 1976, 1977, 1978

IHC:
Scout with Dana 30 or Dana 44 Front and/or Rear Axles and 1310 U-Joints: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980

Jeep:
All Models with Dana 30 or Dana 44 Front and/or Rear Axles and 1310 U-Joints: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991