QU20028U Used 1350 Series Ford Sterling 10.25" Rear Axle Pinion Yoke

QU20028U Used 1350 Series Ford Sterling 10.25" Rear Axle Pinion Yoke for 1987-1992 Diesel and 460 trucks This yoke takes u-joints with 1-3/16" diameter cups. Length of pinion spline is approximately 1-17/64". Available while supplies last.

For 1985 to 1992 Ford trucks with Yokes with unthreaded holes, see QU20029.
Also See: QU20028 New Rear Axle Pinion Yoke

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
U-Joint Size
Length
Matching Parts
Applications

Tech Note 1: U-Joint Size
QU20028U yoke is made to take universal joints made to Spicer 1350 series external snap ring universal joint specifications. Your u-joint cup diameter should be 1-3/16" and the overall width of the universal joint should be 3-5/8". See TK40719 and QU40731 External Snap Ring Universal Joints.

Tech Note 2: Length
This 31 spline yoke has a length through the hole of 1-17/32" so it will NOT fit later 10.25" and all 10.5" rear axles. See QU20102 for a long spline Pinion Yoke.

Tech Note 3: Matching Parts
When replacing an old pinion yoke, always replace the pinion seal, pinion nut, and crush sleeve. Replace the u-joint strap kit and outer pinion slinger as needed.
Order these matching parts separately:
QU40709 U-joint Strap and Bolt Kit
QU20050 Pinion Seal
QU20442 Pinion Nut
QU20003 Outer Pinion Slinger
QU20000 Crush Sleeve
Ford Shop Manuals

Applications
Ford:
F-250, F-350 with Diesel or 460: 1985.5, 1986, 1987, 1988, 1989, 1990, 1991, 1992