QU10966U Used Axle Mounted 4x4 Shift Indicator Switch

QU10966U Used Axle Mounted 4x4 Shift Indicator Switch for 1987-2002 Dodge with CAD Front Axle is used on both 1988-2002 Full-Size and 1987-1993 Dakota axles with Vacuum Controlled Central Axle Disconnect (CAD) Systems. All 1994-2002 Dodge Ram 1/2 ton, 3/4 ton, and 1 ton 4x4 trucks with Dana-Spicer CAD Front Drive Axles use this switch. 1987-1993 axles with pin-type electrical connectors also use QU10966. QU1099 screws into QU40317 CAD housing. Female, 2-pin weatherproof electrical connector. Order QU10967 O-Ring to seal between Switch and CAD housing. Genuine original equipment part. If you need a replacement pigtail and weatherproof male connector, please see QU90002. Country of origin unknown.

Also See QU10966 New Switch NO LONGER AVAILABLE
Also See QU11389 aftermarket replacement switch

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Grease Connectors
Matching Parts
Applications

Tech Note 1: Grease Connectors
The weatherproof connectors are usually pretty good at keeping moisture from corroding the connectors, but I always like to use a little S9980 Dielectric Grease just in case.

Tech Note 2: Matching Parts
QU40317 CAD Housing
QU10967 O-Ring
QU90002 Male Double Terminal Pigtail
QU11389 Replacement Switch
S9980 5 gram packet Dielectric Grease

Applications:
DODGE:
Ram 1500: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Ram 2500 and Ram 3500: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2002.5