QU10966 Axle Mounted 4x4 Shift Indicator Switch for Dodge with CAD Axle

QU10966 OEM Axle Mounted 4x4 Shift Indicator Switch for 1987-2002 Dodge with CAD Front Axle is used on both 1988-2002 Full-Size and 1987-1993 Dakota axles with Vacuum Controlled Central Axle Disconnect (CAD) Systems. All 1994-2002 Dodge Ram 1/2 ton, 3/4 ton, and 1 ton 4x4 trucks with Dana-Spicer CAD Front Drive Axles use this switch. 1987-1993 axles with pin-type electrical connectors also use QU10966. QU10966 screws into QU40317 CAD housing. Female, 2-pin weatherproof electrical connector. Genuine original equipment part. Country of origin unknown. Special Order only. 

Order QU10967 O-Ring to seal between Switch and CAD housing. If you need a replacement pigtail and weatherproof male connector, please see QU90002. 

Also See QU11389 aftermarket replacement switch
Also See QU10966U Used Switch (available while supplies last)

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Grease Connectors
Matching Parts
Applications

Tech Note 1: Grease Connectors
The weatherproof connectors are usually pretty good at keeping moisture from corroding the connectors, but I always like to use a little S9980 Dielectric Grease just in case.

Tech Note 2: Matching Parts
QU40317 CAD Housing
QU10967 O-Ring
QU90002 Male Double Terminal Pigtail
QU11389 Replacement Switch
S9980 5 gram packet Dielectric Grease

Applications:
DODGE:
Ram 1500: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Ram 2500 and Ram 3500: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2002.5