QU10636U Used 1410 Series Pinion Yoke for 00-02 Ford & Ram Dana 80 Rear

QU10636U Used 1410 Series Pinion Yoke for 2000-2002 Ford and Ram Dana 80 Rear Axle is a yoke with a factory installed protective Flat slinger. QU10636U fits all 2000-2002 Dodge Ram 2500, Ram 3500 Dana 80 rear axles AND all those 2001-2002 Ford F-350 Super Duty trucks with Dana 80 rear axles using a pinion yoke with a flat slinger. Available while supplies last.

Also See: QU10636 New 1410 Series Pinion Yoke
Also See: QK4869 Pinion Yoke Kit

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
U-Joint Specs
Matching Parts
Lubricate
Applications

Tech Note 1: U-Joint Specs
QU10636 Dana 80 Half-Round Pinion End Yoke accepts external snap ring type universal joints made to Spicer 1410 series dimensional specifications. The u-joint cup diameter is 1-3/16" and the overall width of the installed universal joint is 4-3/16". Matching universal joints are TK40705 and QU40789.

Tech Note 2: Matching Parts
Exploded View XV2011 2000-2002 Dodge Ram 2500, Ram 3500 Dana 80 Rear Axle
QU40251 Pinion V-Seal for 2000-2002 Dodge
QU40335 Shallow Shell Pinion Seal was used in most early production Dodge axles
QU40248 Deep Shell Flanged for later Dodge production axles
QU40473 Pinion Seal for 2001 to 2002 Ford Dana 80 axles using this pinion yoke
QU40709 U-Joint Strap and Bolt Kit
QU40061 Pinion Nut
QU40250 Pinion Washer
QU40095 Outer Pinion Slinger
QU40218 Limited Slip Lubricant

Tech Note 3: Lubricate
The Pinion Seal and the Yoke seal surface must be lubricated with clean grease before final assembly to provide initial lubrication.

Applications

Dodge Ram:
Ram 2500 and Ram 3500 Dana 80 Rear Axles: 2000, 2001, 2002

Ford:
Ford F-350 Super Duty trucks with Dana 80 rear axles using a pinion yoke with a flat slinger: 2001, 2002