TK4984 1979-1993 SRW Rear Wheel Bearing, Seal, & Spindle Nut Kit

TK4984 SRW Torque King® Rear Wheel Bearing, Seal, and Spindle Nut Kit for 1984-1993 Dodge D350, W350 1-ton and 1989-1993 D250, W250 Diesel 3/4 ton trucks with Single Rear Wheels and Dana 70 rear axles. Also fits 1979-1994 B300 SRW Maxi Van with Dana 60 Rear Axle and 9,000 pound GVW. Kit includes Timken Bearings®, Double Lip Wheel Seals, Steel Axle Shaft Flange Gaskets, Spindle Nuts, Spindle Nut Locks, and Threadlocker.

Also See: TK8321 Bearing and Seal Kit less Spindle Nuts and Locks or TK8304 Master Kit with Installation Tools

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
SAFETY NOTE!
Fits
Tools
Grease Bearings
Nut Design
Applications

Tech Note 1: SAFETY NOTE!
Stock Elastic Stop Spindle Nuts and Lock Wedges used on Dodge Dana 70 rear axles after approximately January 8, 1979 are designed to be installed once and only once! For safety reasons, you must discard both the nut and wedge if they are removed from the spindle for any reason. Both parts lose a percentage of their resistance of coming off when they are removed. You may hear of cases where this type of factory nut has come off while the truck was being driven. Invariably, these failures involve nuts and wedges that have been reused or improperly installed. NEVER REUSE FACTORY ELASTIC STOP SPINDLE NUTS and LOCK WEDGES!!!!!

Tech Note 2: Kit Components
2 each Timken ® Wheel Bearings/Cups: QU50411, QU50412, QU50413, QU50414
2 QU40450 Inner Wheel Seals
2 QU40118 Spindle Nut
2 QU40089 Spindle Nut Lock
2 QU40078 Dana 60/70 Axle Shaft Flange Gasket
Plus S24200 Medium strength blue Threadlocker for the axle shaft flange bolts.

Tech Note 3: Tools
Available Installation Tools to make your job easier and faster:
QT1801 Outer Wheel Bearing Cup Installer
QT1804 Inner Wheel Bearing Cup Installer
QT1500 Inner Wheel Seal Installer
QT1100 1" x 8" Driver Handle
QT1009 or QT1009i Spindle Nut Socket

Tech Note 4: Grease Bearings
Under operating conditions, the rear wheel bearings are bathed in oil from the differential, but they do need to be packed with grease to provide initial lubrication.

Tech Note 5: Nut Design
For Dana 60 and Dana 70 full-floating rear axles, Dodge changed from using a double spindle nut setup (QK4730) to a single nut with lock (QK4015) effective January 9, 1979. TK4984 includes the 1-9-1979 and later Spindle Nut and Lock.

Applications:
Dodge:
B300 Van with 9000 pound GVW: 1979.5, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994
D200, D300 with Dana 60HD Rear Axle: 1979.5, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
D200, W200, D250, W250 Dana 70 Single Rear Wheel Axles with 2" Spindle Threads: 1979.5, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
D300, W300, D350, W350 Dana 70 Single Rear Wheel Axles with 2" Spindle Threads: 1979.5, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993