null

D441958 Basic Differential Shim Kit for Ford Dana 50 Axles

Dana Axle
No reviews yet Write a Review
$13.98
SKU:
441958
UPC:
198345767389
Condition:
New
Shipping:
Calculated at Checkout
In Stock & Ready To Ship!
Availability: Non-Stock Special Order 3-5 Days
Current Stock:Only left:

Description

D441958 Basic Differential Shim Kit for Dana 50 Axles includes a selection of different thickness shims to allow you to adjust Differential Bearing Preload and Ring Gear Backlash on your 1980-1997 Ford Dana 50IFS Twin Traction Beam or 1999-2005 Ford Dana 50 Monobeam 4x4 front axle.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Differential Shims 
Other Shims
Matching Parts
Applications

Tech Note 1: Differential Shims 
Ford Dana 50 Axles uses Selective Fit Shims between each differential bearing and the differential case to adjust Differential Bearing Preload and Ring Gear Backlash. To increase backlash, the shim thickness on ring gear side of the differential is reduced and the opposite shim pack is increased by the same amount. This will move the ring gear away from the pinion gear and increase backlash. Usually only a very small change of 0.005" or less will be enough to move a close, but out of tolerance backlash reading to within specification.

Tech Note 2: Other Shims
For Pinion depth, Ford Dana 50 axles typically use QU40527 Inner Oil Baffle PLUS one of two shim types for setting pinion depth. Method 1 for 1988 and earlier axles had the pinion height set by a combination of QU40527 baffle and shims under the pinion bearing cup and a slinger shim between the inner pinion bearing and pinion head. Method 2 replaced Method 1 starting in 1989 for both new axles and for servicing 1980-1988 axles., Method 2 uses thick, selective fit shims between the inner bearing and pinion head and QU40527 baffle under the inner bearing cup. Pinion turning preload is set using shims (1980-1997 or a crush sleeve (1999-2005).

Tech Note 3: Matching Parts
Interactive Exploded View XV1010DT 1995, 1996, 1997 Ford F250 Dana 50IFS Axle
QU40561 Master Shim Kit 1980-1997 Dana 50IFS Axle
QU40390 Pinion Depth and Differential Shim Kit 1999-2005 Dana 50 Monobeam Axle
QU40009 Pinion Nut
QU40010 Pinion Washer
QU40226 Snap Ring for 1983-1997 Right Differential Output Shafts
TK4885 Diff and Pinion Bearing only Kit
QU50581 Differential/Pinion Bearing and Seal Kit 1980-2005

Applications

Ford:
F-250 Dana 50IFS Front Axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
F-350 Dana 50IFS Front Axle: 1980, 1981, 1982, 1983, 1984, early 1985
F250, F350SRW Dana 50 Monobeam Axle: 1999, 2000, 2001, 2002
Excursion: 2000, 2001, 2002, 2003, 2004, 2005

Product Reviews

No reviews yet Write a Review

Delivery & Returns

Shipping times are estimated in your cart.

 

More info can be found at the link below.