QU42008U USED Bare Front Spindle for 1973-1976 F100, Bronco, Jeep

QU42008U USED Bare Front Spindle for 1973-1975 Ford Bronco, F100 and 1974-1976 Jeep J-Series Jeep Wagoneer, Cherokee and J-10 4x4s with Dana 44 drum brake front axles. Available while supplies last.

Also See: QU42007 New Spindle Kit
Also See: Y442007 Replacement Front Spindle Kit for 1973-1975 Ford and 1974-1976 Jeep J-Series Dana 44 is a low cost, yet high quality replacement part. Imported.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Drum Brakes, Ford and Jeep
Available Separately
QU42007 Spindle Kit
V-Seals, Early Applications
Spindle Seals, Late Applications
Installation
Matching Parts, Ford and Jeep
Applications

Tech Note 1: Drum Brakes, Ford and Jeep
QU42008U Spindle only fits 4x4s with front drum brakes.
Ford did not introduce front disc brakes for the Bronco and F100 4x4s until the start of the 1976 model year.
Jeep offered J-Series full size Cherokee, J10 truck, and Wagoneer 4x4s with optional front disc brakes for the 1974-1976 model years. If your big Jeep has front disc brakes, you need QU40593 Spindle.

Tech Note 2: Available Separately
QU42008U is a BARE Spindle. Available Separately:
X10000 spindle bearing
QU40070 spindle thrust washer
QU40071 large spindle seal

Tech Note 3: QU42007 Spindle Kit
For a Complete Spindle Kit, Order QU42007. Includes Spindle and the following:
X10000 spindle bearing
QU40070 spindle thrust washer
QU40071 large spindle seal

Tech Note 4: V-Seals, Early Applications
A small number of very early production axles may be found with QU20040 2" ID Rubber V-Seal instead of QU40071 2-1/4" Large Rubber V-Seal. The two seal types are not interchangeable. If you have one of those early axle shafts, you will need to replace the QU40071 2-1/4" Large Rubber V-Seal included in QU42007 Spindle Kit with either QU20040 2" ID Rubber V-Seal or QU40043 Spindle to Axle Shaft Seal.

Tech Note 5: Spindle Seals, Late Applications
If you have worked on later model Dana axles with two spindle seals, you may wonder why QU40056 Small Spindle V-Seal was not used on your original spindle and why one is not included in our parts list. The answer is: The bearing bore in original spindles is generally not machined deep enough to accept both the spindle bearing and QU40056 Seal.

Tech Note 6: Installation
Before installing your new spindle, lube the bearing, seals, and thrust washer with QU90018 Pyroplex® grease. Also, apply some Anti-Seize Compound to the mating surfaces between the spindle and steering knuckle.

Tech Note 7: Matching Parts, Ford and Jeep
Matching Parts for QU42008U Spindle:
QU90001 FORD Wheel Seal
QU50654 JEEP Wheel Seal
QU50448 Timken® Outer Wheel Bearing
QU50447 Timken® Outer Wheel Bearing Cup
QU50578 Timken® Inner Wheel Bearing
QU50577 Timken® Inner Wheel Bearing Cup
TK4711/TK4780 FORD Premium Wheel Bearing and Seal Kits 1973-1975 Ford with Timken Bearings
QK4727 3 Piece Round, 4 Slot Spindle Nut Kit with Round Lockwasher
QU20392 Drum Brake Wheel Hub
QT1025 4 Lug Spindle Nut Socket
QU90018 Protection Plus Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease
QT1502 FORD Wheel Seal Installer
QT1504 JEEP Wheel Seal Installer
QT5500 Wheel Bearing Packer
Ford Shop Manuals
Jeep Shop Manuals

Tech Note 8: Applications
Ford:
Bronco and F100 4x4s: 1973, 1974, 1975

Jeep:
Cherokee, Wagoneer, J-10 Truck with Front Drum Brakes: 1974, 1975, 1976