Description
QU40976 29 Spline Round Pinion Flange for Dodge and 1974-1999 Chrysler 9-1/4" Rear Axles allows you to beef up your axle to take heavy-duty 1330 or 1350 series u-joints. QU40976 has a 4 Bolt 3-15/16" Bolt Circle and a 2.161" Male Pilot. Bolt hole size is 12mm x 1.75 thread.
Note: To upgrade your axle to run larger u-joints, use with QU40975 or similar Flange Yoke.
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Flange Specs
Matching Parts
Applications
Tech Note 1: Flange Specs
QU40976 Specs:
Spline Count: 29
Ground Hub Diameter: 1-7/8"
Pilot Diameter: Male 2.161"
Bolt Circle Diameter: 3-15/16"
Bolt Hole Size: 12mm x 1.75
| Parts You May Also Need: | |
 |
QU20103 12MM Metric Driveshaft Bolt |
 |
QU50691 Standard Pinion Seal |
 |
QU11076 Premium Pinion Seal |
 |
QU10863 Pinion Nut |
 |
QU11077 Pinion Crush Sleeve |
| QU40975 1350 Series Flange Yoke | |
Applications
Dodge, Plymouth, and Ram:
All with Chrysler 9-1/4" Rear Axle being modified to take larger u-joints: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
Warranty
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.
