QU40916 1310 Series 3" Driveshaft Tube Weld Yoke

QU40916 1310 Series 3" Driveshaft Tube Weld Yoke for Chevy, Ford, GM, and Jeep rear driveshafts with 3" diameter, 0.083" wall thickness steel tubing. USA Made.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
U-Joint Specs
Yoke Specs
Used On
Matching Parts
Applications

Tech Note 1: U-Joint Specs
QU40916 accepts external snap ring universal joints made to Spicer 1310 series dimensions. The cup diameter is 1-1/16" and the installed width of the u-joint is 3-7/32".

Tech Note 2: Yoke Specs
The length from the hole centerline to point of weld is 1-11/16". The maximum u-joint angle is 21.5°.

Tech Note 3: Used On
QU40916 Yoke was primarily used on 1/2 and light duty 3/4 ton models, however some smaller SUVs and a few old 1 ton vehicles also used them.

Tech Note 4: Matching Parts
Matching Parts for QU40916 Tube Yoke are:
TK40720 Torque King® Premium Universal Joint with Cold-Forged Cross
QU40769 Greaseable Universal Joint with Metal Backed Seals

Applications

Chevy and GMC:
1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981

Ford:
1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978

Jeep:
J-Series Full Size: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988