Description
QU40856 1410 Series Tube Weld Yoke of 4" x 0.083" Driveshafts is an exact replacement for the short coupled 4" tube yoke used on some 1994-2002 Dodge Ram 2500 and Ram 3500 rear driveshafts. USA Made.
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Driveshaft Tube
Matching U-Joints
Tech Help
Applications
Tech Note 1: Driveshaft Tube
Make sure the outside diameter of your driveshaft tube is 4". Measure the distance from the center of the weld to the center of the u-joint hole. If that dimension is approximately 1-3/4" to 2", then this is the part for your Dodge driveshaft.
Tech Note 2: Matching U-Joints
QU40856 Tube Yoke takes external snap ring type universal joints made to Spicer 1410 series specifications. The u-joint cup diameter is 1-3/16". The overall u-joint width is 4-3/16". See TK40705 and QU40789 universal joints.
Tech Note 3: Tech Help
Driveshafts need to be retubed anytime the tubing gets bent or dented. Driveshaft assembly can be done by any competent machinest, but best results are usually obtained from dedicated driveshaft specialists who can both build and balance the finished shaft. For information on driveshaft runout and balance, see my TM3000 Driveshaft and Universal Joint Service Manual or TM3000 Excerpt TSB3510 Vibration, Balance, Angles, Ratings, Run Out, Torque Specs.
Applications
Dodge:
Ram 2500, Ram 3500 with 4" Diameter Rear Driveshafts: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Warranty
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.