QU40771 Coarse Spline Front Driveshaft Slip Yoke for 1999-2002 Dodge Ram

QU40771 Coarse Spline Factory Replacement Slip Yoke is a genuine original equipment 14 base on 16 Spline Slip Yoke for 1999.5 to 2002 Dodge Ram 1500, Ram 2500, and Dodge Ram 3500 trucks. Fits 14 base on 16, 15 based on 16 or 16 spline 1-3/8" diameter slip stub. Use with QU40132 Protective Boot. Made in Mexico

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Matching U-Joints
Boot
Applications

Tech Note 1: Matching U-Joints
This yoke is made to fit a 1330 series u-joint which are: 1-1/16" cup diameter, external snap ring type u-joint that has an overall width of 3-5/8". See TK40721 and QU40774 universal joints.

Tech Note 2: Boot
This Slip Yoke is designed to be used with a protective boot so it does not have provisions for lubricating it after it is installed. You MUST coat the splines of the yoke and slip stub with QU90018 Pyroplex® Plus Synthetic Grease or other quality, water resistant NLGI #2 GC-LB grease during assembly. Be careful not to apply excessive lubricant as it may blow out the Slip Yoke end cap when the installed driveshaft articulates during vehicle operation.

Applications
Dodge 4x4:
Ram 1500: 1999.5, 2000, 2001
Ram 2500 Ram 3500: 1999.5, 2000, 2001, 2002