Description
QU40047 Copper Hub Sealing Washer for Spicer Spline Mount, Plastic Dial Locking Hubs used on many 1968-1981 Chevy or GMC and 1968-1979 Ford 4x4 Front Axles. QU40047 seals water out and lubricant in your Spicer plastic dial hubs. Often lost or overlooked, these little guys do a big job. QU40047 fits Spicer spline mount factory hubs on Ford Dana 30, GM Dana 44, GM 10 Bolt, Ford Dana 44, GM Dana 60, and Ford Dana 60 front axles with Spicer Hubs. VERY Limited Supply, When They are Gone, They Will Be Gone Forever! Sold individually.
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Parts Availability
Lubrication
Matching Parts for Small Hubs (Dana 30, Dana 44, GM 10 Bolt)
Matching Parts for Large Hubs (Dana 60)
Applications
Tech Note 1: Parts Availability
Spicer Dana plastic dial hub parts production ended in 1980-1981 so most parts stocks are now nearly exhausted. While Spicer hub locks were durable, by now, most 1968-1981 trucks have either been crushed or have had the original Spicer Hubs replaced by Warn 9790 (M248) for Dana 30/44/GM 10 Bolt axles or Warn 11690 (M256) for Dana 60 axles or by aftermarket hubs. Check the torqueking.com web site for current parts availability.
Tech Note 2: Lubrication
To insure proper hub operation and also protect against corrosion, apply a very THIN film of a quality grease to the internal hub components. Spicer recommended Moly XL hi-speed grease for the internals and Parker "O" Ring Lube (now O-Lube) for the o-rings. Since I did not have ready access to either product, I always used the same grease type as the wheel bearings. The specific grease is probably not as important as the proper quantity. Not enough grease will will lead to both corrosion and metal to metal wear. Too much grease will hinder the locking function of the hubs especially in cold climates.
Tech Note 3: Matching Parts for Small Hubs (Dana 30, Dana 44, GM 10 Bolt)
Under Construction
Tech Note 4: Matching Parts for Large Hubs (Dana 60)
Exploded View XV1006 1977-1991 Chevy & GMC Dana 60 Front Axle
TKA4962 Front Wheel Hub for GM
QU40330 30 Spline Outer Axle Shaft for GM
TKA20332 Front Wheel Hub for Ford
QU40486 30 Spline Outer Axle Shaft for Ford
QU56011 Warn M256 Hub Set
QU56111 Mile Marker Stainless Steel Hub Set
Applications
Chevy and GMC:
K5, K10, K15, K1500 Blazer, Jimmy, Suburban, or Truck: 1968 (late), 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980
K20, K25, K2500 Suburban or Truck: 1977, 1978, 1979, 1980
K30, K35: 1977, 1978, 1979, 1980, 1981
Ford:
F150, Bronco, Dana 44 1978-1979
F250 with Dana 44 3300 Pound rated Closed Knuckle Front Axle: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975
F250 with Dana 44 Open Knuckle Front Axle: 1977 (Late), 1978, 1979
F250 with optional Dana 60 front Axle: 1978, 1979
F350: 1979
Warranty
Product Reviews
-
Perfect
Exactly what I needed and exactly like the copper washers for the front OEM hubs.
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.
