TK3037 Premium Rear Driveshaft U-Joint Kit for 1989-1993 Dodge with 2 Piece Driveshaft

TK3037 Torque King® Premium Rear Drive Shaft Universal Joint Kit for 1989 to 1993 Dodge with 2 Piece Driveshaft fits both 4x2 D250, D350 and W250, W350 4x4 Trucks with Cummins Diesel engines (either automatic or manual transmission) and some gas engine models of the same era. Torque King® Non-Greaseable Universal Joints with their factory synthetic lubricant and superior seals trap air under pressure during assembly which helps keep contaminants out, plus the rugged Torque King® Cold-Forged Design makes these Kits the preferred choice for Cummins Diesel Trucks. USA Made except Boot Clamps Made in Canada.

Each Kit includes 3 Torque King® TK40705 Cold-Forged, Alloy Steel, Non-Greaseable Universal Joints, and 2 QU40709 Strap and Bolt Sets, QU40084 and QU40133 Boot Clamps, and S9978 Medium Strength Threadlocker for the Center Bearing Bolts. Plus, you can order your Kit with or without optional 20 page TM3316 External Snap Ring Single Cardan U-Joint & Driveshaft Service Manual with over 80 color photographs including Color Exploded Views! 

For a Kit with 2 universal joints, see TK3038.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Why use Torque King® U-Joints?
U-Joint Specs
Applications

Tech Note 1: Why use Torque King® U-Joints?
For decades, the vast majority of u-joints on the market have used inexpensive crosses that are hot forged. This type of u-joint worked just fine with gas engine and non-turbo diesels, but when Chrysler introduced the Cummins Diesel engine for the 1989 Model year Dodge truck, hot forged joints just could not and can not take the Cummins torque without the bearing rollers wearing into the cross journals. For this reason, we only recommend our Torque King® universal joints with wear resistant Cold-Forged crosses and excellent seals be used in trucks with a Cummins Diesel engine. If you have one of the rare 1989-1993 gas V8 Dodge trucks with 1410 series rear u-joints, YOU can use our less expensive QK3001 or QK3032 U-joint Kits with hot forged u-joints.

Tech Note 2: U-Joint Specs
TK3037 uses TK40705 external snap ring type universal joints made to Spicer 1410 series specifications. The u-joint cup diameter is 1-3/16". The overall u-joint width is 4-3/16".

Applications
Dodge:
Dodge Trucks with 2 Piece 1410 Series Driveshafts (All Diesels and some gas trucks): 1989, 1990, 1991, 1992, 1993