Description
QU20751 1/2" Wheel Bolt for 1977.5-1979 Ford F250 & 1979 F350 4x4 trucks with Dana 44 or Dana 60 front axles and ORIGINAL wheel hubs. Also fits 1973-1979 Ford F250 Dana 60 rear axles and 1979 4x4 F350 Dana 70 rear axles. Plated for corrosion protection.
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Do Not Reuse Wheel Studs
Only for Original Hubs
Matching Parts
Applications
Tech Note 1: Do Not Reuse Wheel Studs
For safety, always install NEW wheel studs when assembling a hub and rotor. After assembly, check the rotor brake surfaces for lateral runout. If lateral runout exceeds 0.003", have your hub and rotor resurfaced (preferably with an on-vehicle brake lathe) before placing them in service. Failure to do so may cause brake pedal pulsation during braking.
Tech Note 2: Only for Original Hubs
For the 1980 model year, Ford increased the knurl diameter of the stud. QU20751 will ONLY fit the original hubs the truck was built with. All our replacement Dana 44 and TKA20332 Dana 60 hubs for the 1977.5-1979 models year F250, F350 4x4s are made to take QU20357 1980-up wheel stud.
Tech Note 3: Matching Parts
Exploded View XV108 1978-1979 Ford F250, F350 Dana 60 Front Wheel Hub
QU40169 Spindle
QU40119 Wheel Seal
QU50398 Inner Wheel Bearing
QU50396 Inner Wheel Bearing Cup
QU20665 Brake Rotor
TKA20332 Wheel Hub
QU50411 Outer Wheel Bearing Cup
QU50412 Outer Wheel Bearing
QU40038 Spindle Thrust Washer
QU40036 Spindle Nut
QU40037 Spindle Lock Washer
QU42085 Drive Gear Spacer
QU40553 Hub Full Time Drive Gear
QU40155 Axle Shaft Snap Ring
QU40554 Hub Cap
QT1505 Wheel Seal Installer
QT1804 Inner Wheel Bearing Cup Installer
QT1801 Outer Wheel Bearing Cup Installer
QT1016i or QT1025 6-Lug Spindle Nut Socket
QT1100 Driver Handle for Installers
QT5500 Wheel Bearing Packer
Applications
Ford (Original 4x4 Factory Hubs ONLY)
F250 with Dana 44 1978-1979
F250 Low-Boy with Dana 44 Front Axle: 1977.5, 1978, 1979
F250 with optional Dana 60 Front Axle: 1978, 1979
F250 with Dana 60 Rear Axle: 1973, 1974, 1975, 1976, 1977, 1978, 1979
F350: 1979
Warranty
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.
