QU20271U Used Dana 60 Empty Dana 60 Fast Ratio Differential Case

QU20271U Good Used Differential Case Dana Model 60 is a genuine Dana-Spicer part. QU20271U fits many Dana-Spicer Model 60 front or rear axles with open differentials and 4.30 or numerically lower gear ratios (ex: 3.54). Also fits 3.07 ratio Dodge Dana Model 61 front axles.

Also See QU40514U Used Loaded Diff Case Kit for 2000-2002 Dodge Ram front applications
Also See QU40254 New Dana Model 60 Bare Differential Case Kit
Also See QU20338U Used Loaded 35 Spline Dana Model 60 Front Axle Differential Case

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Service Manual
Matching Parts
Applications

Tech Note 1: Service Manual
When replacing your old differential case with a new one, you will need Master Bearings and a dial indicator to determine the new shim pack thicknesses. Service procedures are covered in my TM4400 Pinion and Differential Bearing Service on Dana-Spicer Monobeam Axles.

Tech Note 2: Matching Parts
12 QU40086 Ring Gear Bolts
QU40206 Differential Shim Kit
QU40117 Cross Shaft Retaining Pin
QU40331 35 Spline Differential Inner Gear Kit for front axles
QU40485 32 Spline Internal Differential Gear Kit for 2000-2002 Dodge front axles NO LONGER AVAILABLE
QU40184 Differential Side Bearing Set
QU40059 Front Axle Shaft Seal for Dana 60, Dana 61 Front axles up to 1993
S82194 RTV Sealant
S24200 Threadlocker
QU90008 Gear Marking Compound
QU40367 Diff Cover Gasket
QU40343 Differential Cap Retaining Bolt
QT1158 Differential Bearing Installer
QT1098 Differential Master Bearings NO LONGER AVAILABLE
QT1032 Differential Case Spreader

Applications:
(Incomplete, more will be added as time permits)

Chevy and GMC:
1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 1 Ton Front Axle with 3.73 or 4.10 ratio

Dodge:
1989, 1990, 1991, 1992, 1993 W-250 with Dana 60 Front Axle, Cummins Diesel and 3.54 or 3.73 ratio
1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 1 Ton with Dana 60 Front Axle and 3.54 or 4.10 ratio
1989, 1990, 1991, 1992, 1993 W-250 with Model 61 Front Axle, Cummins Diesel, and 3.07 Ratio
1987, 1988, 1989, 1990, 1991, 1992, 1993 W-350 with Model 61 Front Axle and 3.07 Ratio

Ford:
1978, 1979 F-250 or F-350 with Model 60 Front Axle and 3.54 or 4.10 ratio
1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 F-350 with Model 60 Front Axle and 3.54 or 4.10 ratio
1999-2004 Super Duty with Model 60 Front Axle and 3.54 or 4.10 ratio
1978, 1979 F-250 with Model 60 Rear Axle, Open Differential and 3.73 or 4.10 ratio

International:
1975 1300 Camper Special with Model 60 Front Axle and 3.54, 3.73, or 4.10 ratio

Jeep:
1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988 J4800, J20 with Model 60 Rear Axle, open differential and 3.54, 3.73, or 4.10 ratio