QU20258U Used NP205F 1330 Series Front Output Yoke

QU20258U Used NP205F 1330 Series Front Output Yoke is a good used Front Output Yoke with 2-1/8" ground hub diameter and protective slinger for Ford New Process NP205 Transfer Cases using standard single joint, non-CV front driveshafts with 3-5/8" wide universal joints.

Also See QU40823 New 1330 Series NP205 Yoke

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Used Product Note
Matching U-Joints
Matching Parts
Shaft Upgrade
Applications

Tech Note 1: Used Product Note
QU20258U is a good used yoke. There will be external rust. The main seal surface will be in good shape.

Tech Note 2: Matching U-Joints
QU20258U is made for external snap ring type universal joints made to Spicer 1330 series dimensional specifications. The u-joint cup diameter is 1-1/16". The overall width is 3-5/8". Matching universal joints are TK40721 or QU40774.

Tech Note 3: Matching Parts
Optional matching parts for QU20258U Yoke are:
QU40768 Driveshaft U-Bolt Kit to secure the driveshaft universal joint
TK50123 2-1/8" ID Output Seal
TK10513 Rubber Spline Seal to seal oil from leaking past the inside splines
QK2036 Output Yoke Nut and Washer Set
TK10503 5 Bolt Gasket for Rear Output Bearing Flange
TK10514 4 Bolt Gasket for Front Output or Remote Input Bearing Flanges
S9978 Threadlocker
TM2000 NP205 Shop Manual

Tech Note 4: Shaft Upgrade
For high performance rear output applications, I recommend you replace your weak original NP205 32 spline rear output shaft with our TK50084 shaft, the redesigned, stronger part, which was exclusively used in 1989-1993 Dodge Cummins Diesel Trucks with 5 speed manual transmissions.

Applications

Ford NP205 Transfer Cases using Standard Single Joint Non-CV Front Driveshafts with 3-5/8" Wide U-Joints