QT1550 Rear Wheel Seal Installer Plate for GM and Jeep Dana 60 Rear Axle

QT1550 Rear Wheel Seal Installer  for GM and Jeep Dana 60 rear axles. is specifically made to install QU50273 rear wheel seals used on vintage Chevy, GMC, and Jeep Dana 60 Full Floating Rear Axles with 1-13/13" spindle threads. QT1511 is specifically made to quickly and safely install QU50273 Wheel Seals in the back of your vintage Dodge or Jeep truck rear hub. Simply place your Seal on the Tool's pilot, attach a QT1100 series driver handle and drive the seal into place. The Installer will stop when the seal is square to the bore and seated to the correct depth. A relief groove in the installer allow adequate clearance for the outer seal lip, thereby preventing one of the most common causes of premature seal failure. Aluminum Installer is Made in U.S.A. by us here in Roberts, Montana.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
After Installing 
Matching Parts
Applications

Tech Note 1: After Installing 
After the seal is installed, lubricate the seal lips with clean wheel bearing grease.

Tech Note 2: Matching Parts
TK8336 Wheel Bearing and Seal Kit
QU50273 Wheel Seal
QU50780 Inner Wheel Bearing
QU50701 Outer Wheel Bearing Cup
QU50703 Outer Wheel Bearing
QU50413 Outer Wheel Bearing Cup
QU40367 Dana 60/Dana 70 Differential Cover Gasket
QU42029 Reuseable Dana 60 Differential Cover Gasket
QU40027 Spindle Nut Lockwasher
QU40026 Hex Spindle Nut
QU90018 Pyroplex Synthethic Grease
QT5500 Wheel Bearing Packer.

Applications:

Chevy/GMC:
C/K20 with Dana 60 Rear Axles: 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972

Jeep:
J20 with Full Floating Dana 60 Rear Axle: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988