QT1538 Dodge Dana 80 Dual Rear Wheel Seal Installer

QT1538 Dodge Dana 80 Dual Rear Wheel Seal Installer is specifically made to install QU40451, QU50075, and similar inner wheel seals in 1994 to 2002 Dodge 1 ton Ram 3500 trucks with Dana 80 rear axles and dual rear wheels. The Installer will stop when the seal is square to the bore and seated to the correct depth. A relief groove in the installer allows adequate clearance for the outer seal lip, thereby preventing one of the most common causes of premature seal failure. Aluminum Installer is Made in U.S.A. by us here in Roberts, Montana.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
After Seal Installation
Matching Parts
Applications

Tech Note 1: After Seal Installation
After the seal is installed, lubricate the seal lips with clean wheel bearing grease.

Tech Note 2: Matching Parts
Matching Parts/Tools for QU1538 Rear Wheel Seal Installer
QU40451 Original Equipment Wheel Seal
QU50075 Double Lip Rear Wheel Seal
QU50376 Inner Wheel Bearing
QU50377 Inner Wheel Bearing Cup
QT1100 8" x 1" Driver Handle
QT1116 8" x 1.25" Driver Handle

Exploded View XV2011 2000-2002 Dodge Ram 2500, Ram 3500 Dana 80 Rear Axle

Applications
Dodge Ram 3500 trucks with Dana 80 Dual Rear Wheel Axles: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002